700 Cab and its attachments
Removal and installation of front window assembly
10. Check the operating effort of the lock of the
front window assembly.
1)
After finishing the adjustment of steps 6 –
9, check that latching efforts of both right
and left locks (16) and (17) are even.
a Check the latching efforts on both
"Close" side (in the front of the opera-
tor's cab) and "Open" side (in the rear
of the operator's cab).
[*2]
3
Left lower pin:
27 – 34 Nm {2.75 – 3.47 kgm}
2
Mounting bolt: Adhesive (LT-2)
PC200, 200LC, 220, 220LC-8M0
SEN06148-01
21
50-700