Komatsu PC200-8M0 Shop Manual page 1120

SEN06148-01
31. Disconnect harness clamp (41) from the right
back side of cab.
32. Remove bolt (42) under the cab and remove
lock plate (43).
33. Remove bolt (44).
34. Remove 7 mounting bolts (45) and 4 mounting
nuts (46).
a Check the bolt length beforehand.
4
50-700
Removal and installation of operator's cab assembly
35. Lift off and remove operator's cab assembly
(47).
4
Operator's cab assembly: 470 kg
[*1]
[*2]
Installation
q Installation is done in the reverse order of
removal.
[*1]
3
Mounting bolt (42) of lock plate (43):
[*2]
3
Bolt (44):
700 Cab and its attachments
98 – 123 Nm {10 – 12.5 kgm}
245 – 309 Nm {25 – 31.5 kgm}
PC200, 200LC, 220, 220LC-8M0