Warranty - Viper 18600 173CC Operator's Manual

(7) Ardisam is liable for damages to other engine/equipment
components proximately caused by a failure under warranty
of any warranted part.
(8) Throughout the emissions warranty period defined in sub-
section (B)(2), Ardisam must maintain a supply of warranted
parts sufficient to meet the expected demand for such parts.
(9) Any replacement part may be used in the performance of
any warranty maintenance or repairs and must be provided
without charge to the owner. Such use will not reduce the
warranty obligations of Ardisam.
(10) Add-on or modified parts that are not exempted by the
Air Resources Board may not be used. The use of any non-
exempted add-on or modified parts will be grounds for disal-
lowing a warranty claim. Ardisam will not be liable to warrant
failures of warranted parts caused by the use of a non-ex-
empted add-on or modified part.
(11) Ardisam issuing the warranty shall provide any docu-
ments that describe that manufacturer's warranty proce-
dures or policies within five working days of request by the
Air Resources Board.
(D) Emission Warranty Parts List.
(1) Fuel Metering System
(i) Carburetor and internal parts (and/or pressure regula-
tor or fuel injection system).
(ii) Air/fuel ratio feedback and control system.
(iii) Cold start enrichment system.
(iv) Fuel Tank.
(2) Air Induction System
(i) Controlled hot air intake system.
(ii) Intake manifold.
(iii) Air filter.
(3) Ignition System
(i) Spark Plugs.
(ii) Magneto or electronic ignition system.
(iii) Spark advance/retard system.
(4) Exhaust Gas Recirculation (EGR) System
(i) EGR valve body, and carburetor spacer if applicable.
(ii) EGR rate feedback and control system.
(5) Air Injection System
(i) Air pump or pulse valve.
(ii) Valves affecting distribution of flow.
(iii) Distribution manifold.
Check for parts online at www.ardisam.com or call 800-345-6007 M-F 8-5
(6) Catalyst or Thermal Reactor System
(i) Catalytic converter.
(ii) Thermal reactor.
(iii) Exhaust manifold.
(7) Particulate Controls
(i) Traps, filters, precipitators, and any other device used to
capture particulate emissions.
(8) Miscellaneous Items Used in Above Systems
(i) Electronic controls.
(ii) Vacuum, temperature, and time sensitive valves and
switches.
(iii) Hoses, belts, connectors, and assemblies.
Ardisam will furnish with each new engine/equipment written
instructions for the maintenance and use of the engine/equip-
ment by the owner.
Operator's Manual
Viper® 173cc 4-Cycle Engine
21