Download Print this page

Advertisement

IMPORTANT SAFETY INSTRUCTIONS

WARNING: When using electrical appliances, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and/or injury to
1)
Read all the instructions before using the appliance.
2)
To reduce the risk of injury, close supervision is necessary when an
appliance is used near children.
3)
To protect against electric shock, do not place cord or plug in water
or other liquids.
4)
Only use attachments recommended or sold by the manufacturer.
5)
Do not use outdoors. FOR INDOOR HOUSEHOLD USE ONLY.
6)
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
7)
Do not operate any appliance with a damaged cord or plug or after
the appliance malfunctions or has been dropped or damaged in any
manner. Call customer service immediately for further instructions.
8)
For a portable appliance - To reduce the risk of electrical shock, do
not place or store an appliance where it can fall or be pulled into a
tub or sink.
9)
Always unplug any appliance when not in use, before putting on
or taking off parts and before cleaning. Never pull on the cord to
remove the adaptor from the wall outlet.
10)
Do not use an appliance for anything other than its intended use.
SAVE THESE INSTRUCTIONS
persons, including the following:
400-1456/1
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Drinkwell Zen Fountain and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Petsafe Drinkwell Zen Fountain

  • Page 1: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock and/or injury to persons, including the following: Read all the instructions before using the appliance. To reduce the risk of injury, close supervision is necessary when an appliance is used near children.
  • Page 2: Table Of Contents

    Our products and training tools promote a lifestyle of protection, teaching and love; essentials that influence memories for a lifetime. If you have any questions about our products or training your pet, please visit our website at www.petsafe.net or contact our Customer Care Center at 1-800-732-2677. Please register your product within 30 days of purchase at www.petsafe.net.
  • Page 3: Operating Instructions

    OPERATING INSTRUCTIONS DO NOT RUN DRY - FOR INDOOR HOUSEHOLD USE ONLY As with any electrical device, check the electrical cord for any tears or damage before use. Make sure the inline plug is fully connected (Fig. 1). Locate the housing clips underneath the bowl rim and press inwards on the clips until you feel them release.
  • Page 4 OPERATING INSTRUCTIONS Make sure the pump is inside the bowl’s square indention and positioned with the pump tube in the back left corner. Gently press down on the tube to ensure it is secured to the pump (Fig. 4). Replace the housing by lowering straight down over the pump. Be sure the housing connects with the guide holes on the rim of the bowl.
  • Page 5: Fountain Disassembly & Cleaning

    FOUNTAIN DISASSEMBLY & CLEANING The fountain must be cleaned on a regular basis to continue working normally! FILTERS: CHANGE EVERY 2 to 4 WEEKS 1) Filters should be changed every two to four weeks. Replace filters more frequently when using the fountain for multiple pets or pets that produce a lot of saliva.
  • Page 6 FOUNTAIN DISASSEMBLY & CLEANING Grab the pump and lift straight up. Continue pulling the cord up and through the opening, until the pump is completely removed from the bowl (Fig. 8). Remove the pump tube by lifting straight up. Fig. 9 Fig.
  • Page 7: Pump Maintenance

    PUMP MAINTENANCE Cleaning the pump is essential to the longevity of the fountain as well as the cleanliness of the water. Clean the pump every 2 weeks. Stator Intake Plate Pump Impeller Remove the pump from the fountain as explained in the Fountain Disassembly and Cleaning section (Steps #4-6).
  • Page 8: Reassembly Of Your Fountain

    PUMP MAINTENANCE Fig. 13 Fig. 14 Once the pump is completely disassembled, you can clean the parts with warm, soapy water. Use a cotton swab or bottle brush to get inside the pump’s cavity and remove any build-up (Fig. 14). For added disinfecting and/or hard water removal, clean the pump with white vinegar.
  • Page 9 REASSEMBLY OF YOUR FOUNTAIN Take a new filter and rinse under cold water to remove any excess charcoal dust. Insert the filter into the housing and make sure the black side is facing the pump (Fig. 16a & 16b). Fig. 16a Fig.
  • Page 10: Fountain & Your Environment

    Make sure your hands, the cord and the adaptor are completely dry. Connect the inline plug to the adaptor and plug the fountain into an electrical outlet. FOUNTAIN & YOUR ENVIRONMENT If you live in a humid environment and have problems with mold or algae (the parts may feel slimy), simply soak all of the plastic parts (excluding the pump) in a diluted bleach solution for about 10 minutes after regular cleaning.
  • Page 11: Manufacturer's Safety Instructions

    MANUFACTURER’S SAFETY INSTRUCTIONS 1) The fountain is meant to run continuously (always plugged into electricity), as long as the water level is maintained and the fountain is cleaned regularly. Be sure to check the fountain regularly to help prevent damage to the pump, as the water may get consumed or evaporate causing the pump to run dry.