Alcatel ONETOUCH POP 3 Series Repair Documentation page 41

L2 Repair Document

4) PCBA with liquid or mildew.
×
2.
Packing requirements
a) Wrap PCBA with anti-static bag
Note: please keep the anti-static bag clean and intact, especially not to paste any label on it.
b) Choose box according to shipping quantity. Each slot usually put 4 or 5pcs. (4pcs for big one and
5pcs for small one). Meanwhile, use Wrinkled tape (marking the material code and qty) to
distinguish the PCBA of different code.
c) Put this box into a bigger carton and put a cardboard on top (this is to avoid the PCBA to drop
around during transportation)
Rev.
1.0
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
√
5015D/X/A/E_5016A/J Level 2 Repair Document
TCL
Communication Ltd.
×
Page
41/42