Alcatel ONETOUCH POP 3 Series Repair Documentation page 12

L2 Repair Document
VIII. Press "Pass" to continue;
IX. Remove headset according to the instruction;
X. Press "Pass" to continue.

CHARGER
I. Insert charger cable according to instruction, it will detect it and say "Battery Voltage",
"Charger Current", "Charger: OK" if it functions well;
II. Please remove charger cable and press "Pass" to continue.

USB
I. Insert USB cable according to instruction and it will say "USB: OK" if it functions well;
II. Remove USB cable according to instruction and press "Pass" to continue.

GSENSOR
I. Put the handset towards up according to instruction;
II. Press "Pass" to continue;
III. Put the handset "face down", "down", "left", "right" and "face up" according to instruction,
and then the instruction will disappear and it will say "All positions checked" if it functions
well;
IV. Press "Pass" to continue.

LIGHT SENSOR
I. It will show the value of ambient light and the value will change according to the phone‟s
environment (Bright or Dark), then it will say "dark: OK", "bright: OK" if it functions well;
Rev.
1.0
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
5015D/X/A/E_5016A/J Level 2 Repair Document
TCL
Communication Ltd.
Page
12/42