Alcatel ONETOUCH POP 3 Series Repair Documentation page 11

L2 Repair Document
IV. Press "Pass" to continue;
V. Make a noise near the main MIC, you will hear it from the receiver if it functions well;
VI. Press "Pass" to continue;
VII. Make a noise near the sub MIC, you will hear it from the receiver if it functions well;
VIII. Press "Pass" to continue.

VIBRATOR
I. You can feel the phone‟s vibrating if it functions well;
II. Press "Pass" to continue.

ACCESSORY
I. Insert headset according to the instruction and you will hear a voice prompt which
introduces some emergency call numbers through the headset left if it functions well;
II. Press "Pass" to continue;
III. You will hear a voice prompt which introduces some emergency call numbers through the
headset right if it functions well;
IV. Press "Pass" to continue;
V. Make a noise near the headset mic, you will hear it from headset if it functions well;
VI. Press "Pass" to continue;
VII. You will hear FM playing and FM frequency will be displayed on the screen if it functions
well;
Rev.
1.0
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
5015D/X/A/E_5016A/J Level 2 Repair Document
TCL
Communication Ltd.
Page
11/42