Preparing The Stand Mixer For Use; Raising And Lowering The Mixing Head; Installing The Attachments - Sunbeam MIXMASTER 2345 Instruction Manual

P
REPARING THE
Before preparing the mixer for use, be sure the speed control dial is in the OFF position
and the electric cord is unplugged. Be sure to wash bowls and attachments before
initial use.
R L
AISING AND
Press the tilt release button, located at the top
of the neck of the MixMaster
button is depressed, hold the handle (1)
and ease the head of the MixMaster
The MixMaster head will lock into this tilt
®
position (2). To lower the mixing head press
the tilt release button. While the button is
depressed hold the handle (2) and ease the
head of the MixMaster
sound will indicate when the mixer head
has locked into position.
I
NSTALLING THE
Select the pair of attachments best suited for your mixing
job. (See Mixing Guide on Page 12 for recommendations).
Take the attachment that has a red colored band around the
top – illustrated as attachment (A). Insert attachment (A)
into the socket on the side of the mixer nearest the side of
the bowl. The socket is identified by a red dot beside it.
Take the other attachment that has a white colored band
around the top – illustrated as attachment (B).
Insert attachment (B) into the socket nearest
the center of the bowl.
N : Be sure both attachments click firmly in place,
OTE
you may need to twist the beater attachment slightly
to engage it in position prior to pushing it in place.
S M
TAND IXER FOR
M
OWERING THE
. While the
®
back.
®
down (1). A "click"
®
A
TTACHMENTS (B
U
SE
H
IXING EAD
(1)
(2)
, W W
EATERS IRE HISKS
9
TILT
BUTTON
, D
OR OUGH HOOKS
A B
C S
ONE QUARE
B B
EATER EATER
)