Advertisement
Available languages
Available languages
Quick Links
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store
where it was purchased. Please call our customer service number and have your instructions and parts list
ready to provide the model name, part name or factory number:
Or visit our web site 24 hours a day, 7 days a week for product assistance at
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
Arris Writing Desk
Stock # MS18-D2-1011-01
ADULT ASSEMBLY REQUIRED
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
www.whalenstyle.com
Or e-mail your request to parts@whalenfurniture.com
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Date 2018-05-08 Rev. 0001-B Factory: CHEGRE
866-942-5362
LOT NUMBER:
DATE PURCHASED:
/
/
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Mainstays MS18-D2-1011-01
Summary of Contents for Mainstays MS18-D2-1011-01
- Page 1 LOT NUMBER: DATE PURCHASED: Arris Writing Desk Stock # MS18-D2-1011-01 ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please call our customer service number and have your instructions and parts list...
- Page 2 M A X I M U M R E C O M M E N D E D W E I G H T L O A D S MANUFACTURER: Whalen Furniture Manufacturing CATALOG: Arris Writing Desk MODEL # MS18-D2-1011-01 MADE IN CHINA MAXIMUM LOAD 200 lb. (90.8 kg) THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE MAXIMUM WEIGHTS INDICATED.
- Page 3 Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. A- Desk Top (Qty. 1) B- Left Side Frame (Qty. 1) C- Right Side Frame (Qty. 1) D- Bottom Stretcher (Qty.
- Page 4 Assembly Instructions 5/8” Bolt (4 used in this step) ① 2 1/4” Bolt Flat Washer Lock Washer ② (4 used in this step) (4 used in this step) (4 used in this step) ③ ④ NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts.
- Page 5 Assembly Instructions 5/8” Bolt (4 used in this step) ① 6. Stand the unit upright and position at the desired location. 7. Attach two Metal Bars (E) between the Desk Top (A) and the Bottom Stretcher (D) with four 5/8” Bolts (1).
- Page 6 Assembly Instructions 8. If necessary, adjust the pre-attached floor levelers at the bottom of Side Frames (B and C) to level the unit.
-
Page 7: Quality Guarantee
Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. ... - Page 9 NÚMERO de LOTE: FECHA de COMPRA: Escritorio Arris Serie # MS18-D2-1011-01 ENSAMBLE REQUERIDO POR ADULTO Si tienen alguna pregunta acerca del ensamble o si alguna parte está faltante, no retorne esté producto a la tienda donde lo compró. Por favor llame a nuestro departamento de ayuda al cliente teniendo su instructivo y lista de partes para proveer el modelo, nombre de parte o el número de fábrica :...
- Page 10 M Á X I M O P E S O R E C O M E N D A D O FABRICANTE: Whalen Furniture Manufacturing CATALOGO: Escritorio Arris MODELO # MS18-D2-1011-01 HECHO EN CHINA CARGA MÁXIMA 200 lb. (90.8 kg) ESTA UNIDAD DEBE UTILIZARSE CON LOS PESOS MÁXIMOS...
- Page 11 Lista de partes y material de ferretería Por favor lea completamente las instrucciones y verifique que estén todas las partes antes de iniciar el ensamblado. A- Tapa de escritorio (Cant. 1) B- Marco izquierdo (Cant. 1) C- Marco derecho (Cant. 1) D- Soporte inferior (Cant.
- Page 12 Instructivo de ensamble Perno de 5/8” usados en este paso ① Arandela plana Perno de 2 1/4” Arandela de presión ② (4 usados en este paso) usados en este paso (4 usados en este paso) ③ ④ NOTA: Por favor no apriete completamente todos los pernos, hasta que termine con el ensamble de las partes, después asegúrese de apretar todos los pernos, esto hará...
- Page 13 Instructivo de ensamble Perno de 5/8” usados en este paso ① 6. Poner la unidad en posición vertical y en el lugar deseado. 7. Adjuntar 2 barras de metal (E) entre la tapa de escritorio (A) y el soporte inferior (D) con 4 pernos de 5/8”...
- Page 14 Instructivo de ensamble 8. Si fuera necesario, ajuste los niveladores de piso pre-adjuntados en la parte inferior de los marcos laterales (B y C) para nivelar la unidad.
- Page 15 Mantenimiento y Cuidados Use una toalla suave y limpia para evitar daños y rayones. Uso de cera para pulir muebles no es necesario. Si desea usar cera, pruébela en un área que no sea visible para revisar su funcionamiento. ...
Need help?
Do you have a question about the MS18-D2-1011-01 and is the answer not in the manual?
Questions and answers