Other Commands; Opening The Transmitter In Poll Mode; Closing The Connection To A Transmitter In Poll Mode - Vaisala Humicap MMT162 User Manual

Chapter 4 ________________________________________________________________ Operation

Other Commands

VAISALA _______________________________________________________________________ 39

Opening the Transmitter in POLL Mode

Use the OPEN command to connect to a transmitter that is in POLL
mode.
OPEN [aa]<cr>
where
aa = address (0 ... 99)
Example:
open 0
MMT162 0 line opened for operator commands
Closing the Connection to a Transmitter
in POLL Mode
The CLOSE command closes the connection to the transmitter.
CLOSE<cr>
Example:
>close
line closed
>