DEVA Broadcast DB91-TX Setup Instructions page 7

How can the db91-tx be set to act as a streaming audio server, sending audio to db91-rx decoder/s used as an ip audio client

Hide thumbs Also See for DB91-TX:

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: +359 56 820027, Fax: +359 56 836700

E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com

4. Go to Settings> Encoding;

5. Assign Encoder type;

6. Assign Sample rate;

7. Assign desired Signal Quality.

The combination of these parameters will define the stream bitrate (see Bitrate Guide table at

the bottom of this screen). The network connection should have enough bandwidth to process

all the streams. As a rough estimate, the bandwidth should be at least twice the stream's bitrate,

multiplied by the number of simultaneous connections;

8. Press [Save];

- 7 -

Table of Contents