Turning Off Your Iron; Storing Your Iron - Sunbeam 3010 User Manual

for YoUter 1 Jse

Turning Off Your Iron

1 .
Turn the Steam Control and Fabric Select dial
to OFF.
2. Unplug the iron from the power source.
WARNING: NEVER yank the power cord when
unplugging the iron, this can damage the cord.

Storing Your Iron

1 .
Allow the iron to cool.
use
2. If you do not
empty the water reservoir after each use for
a longer iron life. To do so, open the water
reservoir cover and turn the iron upside down
to allow water to flow from the fill hole. Shake
the iron gently to remove trapped water drops.
Close the water reservoir cover.
3. Loosely loop the power cord around the cord
wrap and store the iron on its heel rest.
Important:
Wrapping the card around the iron too tightly
can damage the cord.
Tip: When not ironing, always set the Steam Control
and the Fabric Select dial to OFF.
iron
your on a daily basis,
11