GE IO61X-BAT-KIT Safety And Quick Start Manual page 8

Safety and Quick Start Guide
1.2 Install Rechargeable Battery and Cradle in DPI611 Units
1. Remove the battery cover by loosening the captive battery cover
fixing screw and lifting the cover upwards.
2. If fitted, remove the white battery holder by pulling straight up to
reveal charging cable. Keep this battery holder to keep
compatibility with dry cells.
3. Connect the charging cable to the mating connector on the back
of the rechargeable battery cradle. Do not force the connection,
verify the pin alignment.
4. Push the cradle firmly into the battery compartment.
5. Insert the rechargeable battery CC3800GE into the cradle.
6. Refit the battery cover. Close the battery compartment by
pressing the lugs inside the slots (A) and bring down the cover at
an angle, securing by tightening the fixing screw. (See Figure 2).
7. The battery can be charged by connecting the wall adapter to
the unit or by using the optional desk top charger.
Page 8 of 11
Figure 2 Fit Rechargeable Battery Kit
[EN] English – 109M7337 Rev -
IO61X-BAT-KIT