GE IO61X-BAT-KIT Safety And Quick Start Manual page 4

Safety and Quick Start Guide

Do not reverse the positive (+) and negative (-) terminals. Otherwise, during
recharging, the battery pack will be reverse-charged, abnormal chemical
reactions may then occur, or excessively high current can flow during
discharging, leading to electrolyte leakage, overheating, smoke emission,
bursting and/or ignition.

Do not force the connection if you cannot easily connect the battery pack
terminals to the battery pack charger. Confirm that the terminals are
correctly oriented.

Do not use the battery pack for a purpose other than powering either
DPI611/DPI612 products.

Do not use any battery which is not designed for use with the equipment.

Do not connect the battery pack to any other electrical outlet, vehicle
cigarette lighter, etc.

Do not mix batteries of different manufacture, capacity, size or type within
the DPI611 or DPI612.

If recharging operation fails to complete even when a specified recharging
time has elapsed, immediately stop further recharging.

Do not put the battery pack into a microwave oven. Rapid heating or
disrupted sealing can lead to electrolyte leakage, overheating, smoke
emission, bursting and/or ignition.

If electrolyte leaks from the battery pack or gives off a bad odour, remove
it from any exposed flame. Otherwise, the leaking electrolyte may catch
fire and the battery pack may emit smoke, burst or ignite.

If the battery pack gives off an odour, generates heat, becomes
discoloured or deformed, or in any way appears abnormal during use,
recharging or storage, immediately remove it from the equipment or
battery pack charger and stop using it. Otherwise, the problematic battery
pack can develop electrolyte leakage, overheating, smoke emission,
bursting and/or ignition.

Remove the battery from the equipment when not in use.
Page 4 of 11
[EN] English – 109M7337 Rev -
IO61X-BAT-KIT