Observe Ambient Temperature And Ventilation; Installation Dimensions And Door Opening Angle; Fixing The Handle - Bosch KAN Series Installation Instructions And Instructions For Use

en
Observe ambient temperature and
ventilation
Ambient temperature
The climate class can be found on the rating plate. The
climate class indicates within which ambient temperat­
ures the appliance can be operated. The rating plate
is located in the refrigerator compartment at the right
side.
Climate class Permitted ambient temperature
SN +10 °C to 32 °C
+16 °C to 32 °C
N
ST +16 °C to 38 °C
T +16 °C to 43 °C
Note:
The appliance is fully functional within the room
temperature limits of the indicated climatic class.
If an appliance of climatic class SN is operated at
colder room temperatures, the appliance will not be
damaged up to a temperature of +5 °C.
Ventilation
In order to improve efficiency of the cooling system and
save energy, it is necessary to maintain good ventila­
tion around the appliance for the dissipation of heat.
For this reason, sufficient clear space should be avail­
able around the refrigerator. Suggest: It is advisable for
there to be 50-70 mm of space from the back to the
wall, at least 100 mm from its top, at least 100 mm
from its side to the wall and a clear space upfront to
allow the doors to open 135°.
100 mm
6
100 mm
100 mm
Fit the enclosed spacers to the back of the appliance.
This ensures that there is a minimum distance between
the appliance and the wall.
Installation dimensions and door opening
angle
W2
W W1
908 mm 417.5 mm

Fixing the handle

Before you use the product, please check the handle
of the refrigerator. If the handle is loose, you should
fix it with the hexangular screwdriver in the clockwise
direction, then it can be used normally.
W
W1
W2 D
277 mm 600 mm 1142.5 mm
D1