Decoration; Correct Use; Ce Conformity - Jung RWM 100 WW Operating Instructions Manual

26
(fi g. 1 - III.) by a light, vertical pull
downwards, and stored away in a
protected location.
Don't forget to hang up the smoke
alarm device again on the magnetic
mount (fi g. - III.) after work is
fi nished.
PLEASE NOTE WITHOU T FAIL:
The unit can only give its warning
that may be life-saving under
certain circumstances if the unit is
in its intended installation position
and is clean and undamaged and
has been activated.

DECORATION

The test and stop button (fi g. 1- IV.)
of the smoke alarm device is
removable and can be decorated to
adapt the device to the decoration
in the room. Please decorate only
this removable surface of the
device, and never any other parts of
it!
Attention! The surrounding smoke
intake fi ns (fi g. 1 - II.) must always
be kept free and must never be
covered over!
The type plate of the device can be
found under this easily removable
cover.

CORRECT USE

Only use the unit for the purpose
for which it had been designed and
built. Any other form of use shall be
regarded as inappropriate and
incorrect! This unit may only be
used for the following purposes:
• Detection of fi re and smoke in
private households
• This smoke alarm has a heat
warning function. However, it is not
a heat alarm within the meaning of
EN 54-5.

CE CONFORMITY

This product is tested and certifi ed
as building product according to
EN 14604:2005/AC:2008 in
compliance with Directive 89/106