Table of Contents
Advertisement
Loading Media
Route the media back to and around the Rewind Hub.
Insert the media's leading edge into a Slot on the Media Rewind Hub then insert the Media Clip into
a Slot to secure.
Slide the Rewind Retainer onto the Media Rewind Hub to rest lightly against the outside edge of the
media and tighten the Thumbscrew to secure. Manually rotate the hub to remove any slack in the
media.
After finishing, close the Access Cover then push and hold the FEED key for 4 seconds to secure the backing
material and calibrate the TOF.
3
Advertisement
Table of Contents
Need help?
Do you have a question about the ICLASS Series and is the answer not in the manual?
Questions and answers