Techno-Isel Educational DaVinci Setup page 4

Important Safety Instructions
For DaVinci Operation
WARNING: The DaVinci must be operated with
extreme caution in order to prevent personal
injury and damage to the equipment.
Read All Instructions
1. DO NOT INSERT OBJECTS, INCLUDING FINGERS AND HANDS,
INTO THE MACHINE WHILE POWER IS ON. Inserting objects into
the machine while the power is on can cause SERIOUS PERSONAL
INJURY or POSSIBLE DAMAGE TO THE MACHINE if the machine or
tool is moving or starts to move.
2. DISCONNECT POWER TO THE COMPONENTS. Disconnect power
to all components, including the machine, spindle, and any other
tooling, when not in use, before servicing, and when changing
accessories such as blades, bits, cutters, and fixtures. Do not loosen,
remove, or adjust cables or machine parts while power is on.
3. AVOID UNINTENTIONAL STARTING. Exercise care around the
controls and keyboard to avoid accidental contact that might result
in the unintentional starting of the machine.
4. CHECK FOR CORRECT VOLTAGE. Before connecting the
components to a power source (receptacle, outlet, etc.), make sure
that the voltage supplied is the same as that specified on the
components. A power source with improper voltage can result in
SERIOUS INJURY to the user, as well as SEVERE DAMAGE to the
system. IF IN DOUBT, DO NOT PLUG IN THE COMPONENTS.
5. GUARD AGAINST ELECTRIC SHOCK. The machine and
components are equipped with three pronged grounded plugs that
iii