Using Your Mini Multicooker For The First Time - Lakeland 31822 Instruction Booklet

USING YOUR MINI MULTICOOKER FOR THE FIRST TIME

Warning: Do not insert the plug into a socket and turn on the Mini Multicooker until you
have fully assembled it.
• Unpack the Mini Multicooker, remove all the packaging materials, including the
accessories inside the cooker and the protective film on the steam vent.
• Before first use, wipe outer surfaces and inside of the lid with a clean damp cloth.
• Wash the cooking pot and accessories in hot soapy water and dry thoroughly.
• Make sure that all parts are clean and dry before assembling the product.
• During first use of the appliance an odour may develop, this is normal and will
disappear with use.
• Place the appliance on a stable, heat-resistant work surface, at least 20cm away from
walls and at least 1 metre from the ceiling, to allow sufficient airflow. Never operate
the appliance under cabinets or lighting to avoid damage caused by steam, heat,
splashes and condensation.
• Put the cooking pot inside the Mini Multicooker.
• Slot the end of the power cord into the socket on the side of the Mini Multicooker.
• The Mini Multicooker is now ready to use.
AUDIBLE BEEP
A beep will sound when the appliance is connected to a power supply, buttons are
pressed and the cooking cycle has finished.
9