PeakTech 4120 Series Operation Manual page 106

Internal Modulating Frequency
Phase Deviation
FSK
Carrier Waveforms
Source
Internal Modulating Waveforms
FSK Rate
PWM (only PeakTech 4165)
Carrier Waveforms
Source
Internal Modulating Waveforms
Internal Modulating Frequency
Width Deviation
Sweep (Only P4125 – 4165)
Type
Carrier Waveforms
Direction
Sweep Time
Source
Burst (Only P4125 – 4165)
Waveforms
Types
Start Phase
Internal Period
Gated Source
Trigger Sources
Counter Specification (Only P4125 – 4165)
Function
Frequency Range
Frequency Resolution
Voltage Range and Sensitivity (non-modulation signal)
DC coupled
AC coupled
Pulse width and Duty cycle
2 mHz - 20 kHz
0° - 180°
Sine
Internal/ External
50% duty cycle square
2 mHz - 100 kHz
Pulse
Internal/ External
Sine, Square, Ramp, Arbitrary
2 mHz - 20 kHz
Pulse width 0.0 ns to 200.00 µsec
Linear, Logarithmic
Sine, Square, Ramp
Up / Down
1 ms to 500 s ± 0.1%
Source, External or Manual
Sine, Square, Ramp, Pulse, Arbitrary
Count (1 to 1,000,000 periods), infinite, gated
-360° - +360°
(10 ms - 500 s) ± 1%
External Trigger
Source, External or Manual
Frequency, period, positive Pulse width, Duty
Single channel: 100 mHz - 200 MHz
6 digits/second
DC offset range
100 mHz - 100 MHz
100 MHz - 200 MHz
1 Hz - 100 MHz
100 MHz - 200 MHz
1 Hz - 10 MHz (100 mV
106
±1.5 VDC
20 mV - ±5 V AC+DC
RMS
40 mV - ±5 V AC+DC
RMS
50 mV - ±5 V
PP
100 mV - ±5 V
PP
- 10 V )
PP PP
PP
PP