Sunbeam Intuitive EM8910 Instruction Booklet page 13

Heading
Using the Sunbeam Intuitive Digital (continued)
Tip: To ensure a quality coffee, change the
water in the water reservoir daily and wash
the reservoir at least once a week in hot
soapy water and rinse thoroughly.
• Immediately after being switched on the
machine runs through a set-up cycle. The
noises occuring are perfectly normal.
• During the heating up procedure the
temperature indicator
LCD: Indicates briefly
<<HEATING PLEASE WAIT>>
When the operating temperature is
reached, the temperature indicator
stop flashing and remain a constant light.
See figure 9.
Figure 9
flashes.
will
• After the operating temperature has been
reached, the espresso machine performs an
automatic rinsing cycle. This removes any
old coffee grinds from the coffee brewing
unit.
LCD: Indicates briefly
<<RINSING PLEASE WAIT>>
• The water flows into the drip tray. The
temperature indicator light is constant.
The espresso machine is now ready for
operation.
LCD: The indication on the display will
depend on the last selected coffee setting.
Switching off the machine
• Switch the machine off by pressing the
'POWER' button on the control panel.
• The machine performs a rinsing cycle.
LCD: Indicates briefly
<<RINSING PLEASE WAIT>>
• At the end of the rinse cycle the display
intermittenly flashes
<<UNIT SHUTTING DOWN>> and
<<EMPTY WASTE CONTAINER>>.
The machine switches off automatically
after 60 seconds.
11