Table of Contents
Advertisement
Heading
Trouble Shooting Guide continued
PROBLEM
No espresso/coffee,
only water is running
out
No espresso/coffee,
only water is running
out when using
pre-ground coffee.
42
POSSIBLE CAUSE
Foreign matter is caught in the
grinding mechanism stopping
the beans from moving through beans in and around the grinding
the grinder.
Coffee bean hopper is not
fitted correctly.
Brewing unit is not
in the correct position.
Coffee bean hopper is not in
the correct position.
The pre-ground coffee
receptacle was filled when the
machine was switched off.
WHAT TO DO
Turn the machine off and remove
the hopper. Clean away any coffee
mechanism. Remove the grinding
ring and with the cleaning brush or
tweezers remove any foreign
matter. See page 26, Removing
foreign matter from the grinding
mechanism.
The grinder is working however
there is no sound of coffee beans
grinding. Remove the hopper and
empty the coffee beans into a
container. Replace the hopper onto
the grinding mechanism, check
that the lock on the base of the
hopper opens once it is in the
coffee bean position, if it remains
closed while turning the hopper,
remove the hopper and try
engaging it again. Therefore push
down on the hopper with pressure,
whilst turning.
Should the grinder be working
normally, remove the coffee waste
container after the espresso making
process and check to see if there
is any freshly ground coffee. In this
case turn the machine off, remove
and clean the brewing unit.
Adjust the hopper so that the arrow
on the base of hopper is aligned
with the pre-ground coffee arrow.
When the machine is turned on
it will go through an Auto Clean
cycle, this will discard any
coffee grinds from the coffee
brewing unit. Therefore ensure the
machine is on and in the pre-
ground position before adding
coffee.
Hide quick links:
Advertisement
Table of Contents
