Bleeding The Fuel System; Bleeding Water From The Fuel / Water Separator - Renault Premium DXi 11 Service Manual

Features - servicing
E8-5

Bleeding the fuel system

Unscrew feed pump plunger (1) then operate it.
Pump until plunger (1) becomes hard.
Screw up feed pump plunger (1).
Bleeding water from the fuel / water separa-
tor
Press switch (C6): the drain valve opens and
the water drains out.
The drainage of water lasts for a few seconds.
The following conditions must be fulfilled so
that water can be drained from the fuel / water
separator:
– The fuel / water separator sensor indicates
a high water level (pictogram (G22)
displayed).
– The vehicle is stationary.
– The engine is shut-down.
– The ignition is switched on.
– The parking brake is applied.