Fault Display - Renault Premium DXi 11 Service Manual

Driving
C2-6

Fault display

If there are any faults, one or several warning
pictograms (1) are displayed on the instrument
panel. In such case, the warning light (STOP or
SERVICE) comes on simultaneously to specify
the level of importance of the fault(s).
There are 2 possible cases:
– If the SERVICE warning light (I) comes
on: you must, if possible, identify the
problem and get it remedied or make your
way to the nearest RENAULT TRUCKS
service point or dealer.
– If the STOP warning light (H) comes on:
you must, if possible, identify the prob-
lem and, where applicable, consult the
nearest RENAULT TRUCKS service
point or dealer.
If warning pictogram (G13) is displayed,
start the engine so as to pressurize the
compressed air circuit to see if it disap-
pears. If it stays displayed, it may involve
an EBS fault or a compressed air system problem.
If different faults are present (STOP and SERVICE), only STOP warning light (H)
comes on.
When several faults are present, arrows (2) appear and warning pictograms (1) (that depend
on the nature of the fault) are displayed in succession, then offset to the top of the information
display (see page B2-28).
A text (3), indicating the steps to take or information on the fault, is displayed below picto-
gram (1).