Table of Contents
Advertisement
Optional equipment for the wireless GV1000 camera system are:
• Portable battery pack
• Solar power sub-system
A windows based pc is required to operate the GV1000 which must be supplied by the
user. GenieView recommends a Windows PC running Windows 98, NT, 2000 or XP
operating system, 128MB ram minimum (512MB recommended), and one RS232 serial
port. USB interface can be used with an appropriate USB-RS232 converter (User
supplied).
1.2 Initial Hardware Installation
Installation of the GV1000 camera is very simple. For the wired variant of the GV1000
system (see figure 1)
1. Position( or mount) the camera on a solid surface
2. Connect the supplied RS232 cable to the GV1000 camera (DB15 connector)
3. Connect the cable to the pc (DB9 connector)
4. Plug the supplied universal power adapter into a suitable 110v outlet
5. Connect the power adapter to the GV1000 camera.
Windows
PC
GV1000 RS232
Video Cable
For the wireless variant of the GV1000 system (see figure 2)
1. Position( or mount) the GV1000 receiver on a solid surface
2. Connect the supplied RS232 wireless cable to the GV1000 receiver (DB15
connector)
3. Connect the wireless cable to the pc (DB9 connector)
4. Plug the supplied universal power adapter into a suitable 110v outlet
`
(Supplied )
Figure 1 – Wired GV1000
Page 5
Genieview part Number GV-02-1005 Rev A
110/220
Power
GV1000
Advertisement
Table of Contents
