Table of Contents
Advertisement
2.2.17 Encoder Source
The Encoder Source may be either the Sensor or a File. The Sensor will allow for real-
time video encoding and is the preferred method of operation. A File may be used for
testing by using a reference file in a YUV4:2:0 or YUV4:2:2 format instead of the
GV1000 sensor.
Future releases will support preprocessing which will activate features such as gamma
correction and white balance on the GV1000.
2.2.18 Encode Mode
Stream mode is used to view the encoded data in real time using QuickTime 6.3.
Selecting Store and Forward will instruct the Control Center to save the data received to a
file in a user defined directory. The Capture Duration must be selected to specify the
length, in seconds, of the data to be stored.
2.2.19 Start Encode
Once the encoding configuration has been determined press this button to begin viewing
the MPEG4 video stream. QuickTime 6.3 will automatically launch and begin to display
the video stream.
2.2.20 JPEG Shot
During video streaming it is possible to take a live JPEG shot. This will stop video
streaming and close QuickTime for 5-10 seconds while the JPEG image is being
received. Once received QuickTime will automatically reload and video streaming will
resume.
Page 16
Genieview part Number GV-02-1005 Rev A
Advertisement
Table of Contents
