Table of Contents
Advertisement
1.3.5 Updating the Firmware
Step:
1)
Go to the Utilities menu (Section 2.4)
2)
Click Application Upload.
3)
Click Choose Application File.
4)
Locate the file and press Save.
5)
Press OK.
Note: If after finishing the upload you see the message 'Acknowledge not
received' you must reload the firmware as the GV1000 is now in an un-
initialized state due to a faulty firmware upload.
Page 10
Genieview part Number GV-02-1005 Rev A
Advertisement
Table of Contents
