Clean The Circulating Pump - AEG OKO-LAVAMAT 86820 User Instructions

When the water is completely drained:
7. Press the end stop firmly back into the emergency drain hose.
8. Push the emergency drain hose back in a little and allow it to snap into
the mounting.
9. Put on the flap and close.
The ECO valve does not function when the machine has been fully
3
emptied. Therefore add approx. 1liter of water before the next wash
(pour in through the detergent drawer).

Clean the circulating pump

Warning! Switch off the washing machine and pull the mains plug
1
before cleaning the circulation pump!
0 1. First perform emergency draining (see above: "Perform Emergency
Drain").
2. Lay a cloth on the floor in front of the circulation pump cover. Some
water may run out.
3. Turn the circulation pump cover anti-
clockwise to loosen and remove.
4. Remove foreign body from the
pump housing.
5. Check the pump impeller to see if it can
be turned. (Jerky motion within the pump
is normal.) If the impeller cannot be
turned at all, contact customer service.
6. Replace the pump cover (set the stems at
the cover into the guide slots), and
tighten be turning clockwise.
7. Close emergency drain hose, push in and
fix in place.
8. Close the flap.
Operating instructions
35