MULTIQUIP MAYCO Series Operation Manual page 23

Figure 8. Engine Oil Dipstick Removal
3. Reinsert the dipstick.
4. Pull out the dipstick and check the oil level (Figure 9).
Figure 9. Engine Oil Dipstick Check
5. If the engine oil level is low, add oil through the engine
oil filler hole (Figure 10) with the recommended oil
type (Table 4). Maximum oil capacity is 3.49 quarts
(3.3 liters).
Figure 10. Engine Oil Filler Hole
Table 4. Oil Type
Season Temperature
Summer 25°C or Higher
Spring/Fall 25°C~10°C
Winter 0°C or Lower
MAYCO C30HDGA CONCRETE PUMP • OPERATION MANUAL — REV. #1 (09/09/19) — PAGE 23
LUBRICATION BOX
The C30HDGA features a fully enclosed lubrication box,
which utilizes the "SPLASH" method of lubrication.
Before using your new pump, 7 gallons of SAE 30 motor
oil must be added directly into the lubrication box. Visually
inspect the oil in the lubrication box by making sure the
oil is at the correct operating level as indicated by the dip
stick (Figure 11).
Also reference the oil level decal (Figure 12) adjacent to
the lubrication box.
Oil Type
SAE 10W-30
SAE 10W-30/20
SAE 10W-10
NOTICE
Make sure the pump is on a secure level surface when
checking the oil level inside the lubrication box
NOTICE
The oil level must be checked daily to ensure adequate
oil level and oil cleanliness.
Figure 11. Lubrication Box Dipstick
Figure 12. Lubrication Box Oil Caution
INSPECTION