Aquarium Glass Tank Instructions - Fluval Roma Instruction Manual

Led strip light and aquarium
Hide thumbs Also See for Roma:
Table of Contents

Advertisement

Available languages

Available languages

AQUARIUM GLASS TANK INSTRUCTIONS

Read thoroughly prior to installation
The Fluval Aquarium glass tank comes complete with bottom and top plastic frames glued to it. Do not try to
remove top and bottom frames.
Although the glass tank was manufactured with the maximum care and the most advanced techniques, we still
recommend making a simple inspection prior to the installation to verify that unexpected events during handling
and transportation have not damaged the tank or impaired its water-tightness.
1. Make an initial visual inspection of the glass tank to check for damage or cracks.
2. If the visual inspection does not show any damage, fill the tank with 5cm (2") of water, wait 10 minutes and
check for leaks.
3. Add another 5cm (2") and repeat this process until you are sure there is no sign of any leak.
4. If no leak is detected, proceed with the normal aquarium set up.
The tank is made of glass, always handle it with the utmost care. Make sure to lift it by the base, never
by the top frame.
Never attempt to move or transport the tank if it is not completely empty of water or any other material.
Before handling the Aquarium tank and cabinet, ensure you have sufficient manpower to move them
without any risk.
Always take care not to damage the seals at the edges of the glass panels while maintaining your
aquarium, ie; with planters or algae scrapers.
Never use toxic or aggressive substances to clean your aquarium, such as household detergents.
SETTING UP YOUR FLUVAL AQUARIUM
For proper installation and start-up of your aquarium, please follow these
guidelines, after thoroughly reading this manual and the ones supplied with
the other products included in this aquarium kit:
A. PREPARING THE AQUARIUM KIT FOR START-UP
1 Assemble the aquarium cabinet
2 After verification, place the cabinet and the aquarium
tank in their final location
3 Install the water intake/output systems (where appli-
cable)
4 Set up the filter unit and install it to the aquarium
5 Position the heater in the tank
6 Decorate your aquarium with backgrounds, rocks,
gravel and plants
7 Fill the aquarium with water up to "max water level"
line
8 Prepare the LED Strip Light for start-up and place the
canopy on the aquarium top
B. AQUARIUM START-UP
9 Plug in the filter
10 Plug in the heater
11 Plug in the LED Strip Light
12 Add the fish after the aquarium has matured
6
refer to pag. 7 of this instruction manual
and to the separate instruction manual which is
found in the cabinet box.
refer to pag. 7 of this instruction manual
refer to pag. 8 of this instruction manual
refer to the Fluval filter instruction manual
refer to the Fluval heater instruction manual
refer to pag. 10 of this instruction manual
refer to the Fluval filter instruction manual
refer to the Fluval heater instruction manual
refer to pag. 10 of this instruction manual
Maintenance
For LED Strip Light and tank, refer to LED Strip Light and tank maintenance on page 11. For any mainte-
nance of the other devices, please refer to their respective manuals.
AQUARIUM CABINET INSTALLATION AND PREPARATION
Placing the aquarium with its cabinet in the final location
Please refer to the instruction manual of the aquarium cabinet. Do not attempt to set up the cabinet without
reading and following the instruction manual. If it is missing or unusable, contact the store or Hagen Customer
Service.
Location of the aquarium is very important. Place the aquarium away from direct sunlight. This will reduce
the risks of excessive algae build-up and avoid overheating the aquarium by the sun's rays. Keep your Fluval
Aquarium away from other sources of heat (air ducts, radiators, etc.) for proper temperature maintenance. Drafts
should also be avoided. Do not locate your Fluval Aquarium where water spills will cause damage.
You MUST place the Fluval aquarium on the appropriate Fluval cabinet which was designed with the
correct dimensions and structure to bear the weight of the aquarium full of water. The use of different
cabinets, articles of furniture, TV stands, etc. WILL invalidate your guarantee and will compromise the
product safety.
IMPORTANT: Fluval cabinets are designed to support the total weight of the aquarium. The table below shows
the approx. height of filling of the tank and approx. weight of the aquarium full of water (rocks, decorations or
gravel have not been considered).
FLUVAL ROMA LED
MODEL
TANK DIMENSIONS
Fluval Roma 90
60 x 35 x 45 cm (23.6 x 13.8 x 17.7")
Fluval Roma 125
80 x 35 x 45 cm (31.5 x 13.8 x 17.7")
Fluval Roma 200
100 x 40 x 50 cm (39.4 x 15.7 x 19.7")
Fluval Roma 240
120 x 40 x 50 cm (47.2 x 15.7 x 19.7")
FLUVAL VICENZA and VENEZIA LED
MODEL
TANK DIMENSIONS
Fluval Vicenza 180
92 x 41 x 55 cm (36.2 x 16.1 x 21.6")
Fluval Vicenza 260
121 x 46 x 64 cm (47.6 x 18.1 x 25.1")
Fluval Venezia 190
98 x 70 x 60 cm (38.5 x 27.5 x 23.6")
Fluval Venezia 350
122 x 87 x 65 cm (48 x 34.2 x 25.5")
WARNING: Assure that the selected position has an even and level surface which is able to support the
total weight of the aquarium full of water and the cabinet. Place your new Fluval Aquarium and cabinet
close to an electrical outlet. After placing the cabinet, assure that it is perfectly level by using an
adequate level.
IMPORTANT: Place the aquarium tank directly on the cabinet without any additional support or damper
in between. NEVER insert any lining (e.g. Polystyrene) between cabinet and aquarium.
Never attempt to move or transport the cabinet with the glass tank or any
other load on top of it.
Peel off the protective film on the decor strip (only applies to gloss black décor
strips).
AQUARIUM WARRANTY
Please refer to guarantee section at the end of this manual for warranty and registration details.
HEIGHT OF FILLING (up to the
WEIGHT OF AQUARIUM
max water level line)
FULL WITH WATER
41.5 cm (16.3")
105 kg (231 lb)
41.5 cm (16.3")
138 kg (304 lb)
46 cm (18.1")
222 kg (489 lb)
46 cm (18.1")
265 kg (584 lb)
HEIGHT OF FILLING (up to the
WEIGHT OF AQUARIUM
max water level line)
FULL WITH WATER
45 cm (17.7")
225 kg (495 lb)
54 cm (21.2")
370 kg (815 lb)
50 cm (19.6")
265 kg (584 lb)
55 cm (21.6")
440 kg (970 lb)
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

VicenzaVenezia

Table of Contents