Manual Entry (Waypoint) - Whistler MFU440 User Manual

Manual Entry (Waypoint)

Once GPS has a lock, you can save a special location
(i.e., a new red light camera or even a "trap"). The unit
will store 1000 user locations.
NOTE: Manual entries must be approximately 330
feet apart to prevent overlapping locations. To
manually enter a location, press and hold the Power
button for 3 seconds and the unit will beep to confirm.
Manual entries can be deleted within a certain radius
(selected in Option Select Mode). With a radius
selected, the data can be deleted within the Radius or
they all can be deleted completely from memory.
ADD is displayed when
you first add a Waypoint.
USR LOC is displayed when entering a manually
stored user location.
Distance to waypoint will be displayed (negative
yards) until Waypoint is reached.
PASS is displayed after reaching Waypoint.
OPERATION
EXISTS is displayed when
a Waypoint already exists.
22