Speed Selectable Auto Quiet; Speed Selectable Filter Mode; Vg-2 Mode - Whistler MFU440 User Manual

OPERATION

Speed Selectable Auto Quiet

Traveling below the speed selected in option mode
will engage Auto Quiet mode.
NOTE: Enter Option mode to set Speed Selective
Auto Quiet. (0-40MPH / 0-65KMH)

Speed Selectable Filter Mode

Traveling below the speed selected in option mode
will apply the maximum Filter.
NOTE: Enter Option Mode to set Speed Selectable
Filter. (0-40MPH / 0-65KMH)

VG-2 Mode

See Option Select Mode to turn this feature on/
off. When a VG-2 signal is detected, the VG-2 alert
is sounded and the display flashes "VG-2". After 3
seconds the audio is canceled and the display no
longer flashes. This cycle is repeated if the VG-2 signal
is detected again .
During the period a VG-2 signal is detected, a
radar signal cannot be detected.
However, because the VG-2 alert has confirmed that
a patrol car is nearby, you are already aware of the
potential for speed monitoring and can adjust your
speed accordingly. Laser detection is not affected
while a VG-2 signal is detected.
18