VXS
VXS-10
-10
VXS
VXS
-10
-10
Single-Door Proximity Access Control System
1 1 1 1 . INTRODUCTION
. INTRODUCTION
. INTRODUCTION
. INTRODUCTION
The VisAccess VXS-10 is an electronic access control system
designed for a single access point, such as a main door in an
apartment building or individual office doors. The system control
unit relay activates a lock or electromagnetic strike (EMS), when
a valid proximity key (tag or card) is presented to the reader
located outside the protected area.
The use of a proximity (non-contact) key makes the installation of
the VXS-10 system an attractive possibility in harsh environments
and in places with poor lighting conditions. The proximity keys are
totally sealed and are wear resistant. The reader reads the key's
ID, whenever the key is presented.
A second proximity reader may be connected to the VXS-10 to
control both sides of a door. An optional magnetic stripe card
reader may be connected instead of a proximity reader.
The separate weatherproof readers give added security and
flexibility allowing outdoor or indoor installation.
The VXS-10 control unit (see figure 1) includes a 3-digit display, 3
visual indicators (LEDs) and 4 buttons. An internal proximity
reader located in the upper right corner of the control panel
allows fast and easy programming of access keys. The buttons
are used for entering the password and for programming the unit.
Figure 1 - System Functional Presentation
2 2 2 2 . SPECIFICATIONS
. SPECIFICATIONS
. SPECIFICATIONS
. SPECIFICATIONS
VXS-10 CONTROLLER
Power Input: 9-12V AC/DC
Max Current Consumption: 150 mA (excluding EMS current)
Memory Capacity: 300 tags/cards
Output Relay Contact Rating: 1A Max. continuous current
Display: 3 x 7 segments and 3 LEDs
Operating Temperatures: 0°C to 50°C (32°F to 122°F)
Dimensions (L x W x D): 150 x 105 x 35 mm (5-7/8 x 4-1/8 x 1-3/8 in.)
Color: Dark brown
DE6270
Installation Instructions
CRD-1
Prox. Card
RDR-3
Proximity
TAG-1
Reader
Prox. Tag
Figure 2 - System Components
The VXS-10 has a memory capacity of 300 keys. Adding keys
simply involves presenting new keys to the controller while the
system is in ADD mode.
The user can delete keys in the DELETE mode by presenting
them to the reader or, if a tag/card is not available, by typing in its
number (the same one that appears when adding the key).
The VXS-10 kit includes:
• VXS-10 controller
• RDR-3 proximity reader with 1m (3 ft) 5-wire cable
• Installation instructions
• User Guide
• Control unit base template, for wall installation
Additional tools and equipment that may be needed:
• Proximity tags or cards (ordered separately)
• Power supply for the controller - 12V AC/DC
• Electromagnetic strike (EMS) unit
• Request-to-exit push button or PIR, if "request to exit" option is
required.
RDR-3 EXTERNAL READER
Indicators: Tricolor LED (Green, Red, Amber)
Tag Reading Range: 50-100 mm (2-4 in.)
Frequency: 125 KHz
Tag Code Possibilities: 10
Dimensions (L x W x D): 116 x 70 x 16.8 mm (4-1/2 x 2-3/4 x 5/8 in.)
Weight: 121.5 g (4.3 oz)
Operating Temperatures: -20°C to 50°C (-4°F to 122°F)
Cable (to VXS-10 control unit) maximum length: <10 meters
Color: Dark brown
RDC-3 MAGNETIC STRIPE READER (optional)
Output Type: Open collector, 12V
Communication Signals: Clock and data
CRD-1M
Magnetic
VXS-10
Stripe
Control Unit
Card
12
possible combinations
RDC-3
Magnetic
Stripe
Reader
1