QHYCCD QHY10 User Manual page 18

Changes from the above steps number 8:
Set the merge mode with X and Y ,like choose
8
X=1,Y=same.
9 Press the button of Start to exposure and shoot .
Soon image will be showed in form of RAW which
are still greysale image. Select Convert Color from
Color menu belong
OFFSET,X=0,Y=0 On
Choose Generic RGB from the dropdowns box of
Select Camera. On the window of Preview check if
the color is right. And then click OK .You can
obtain the color image after a while.
If the color is not right ,please try to change the
value of OFFSET,X ,Y
10
menu ,include the type of camera on Select
Camera menu.
Note：In order to improve the focus function
and the speed of preview, there is a
One-Frame Focus mode of QHY10 ASCOM.
When You run focus or preview, you should
select this mode and High Speed. But when
you get started to shoot, you should cancel
this mode and High Speed.
33
to MAXIMDL,set
Convert Color menu.
on Convert Color
AstroART ASCOM Connection Mode
Please download the latest version of the ASCOM
1
from http://ascom-standards.org/ If there is the
latest UPDATE of ASCOM,do it together.
Install ASCOM and its UPDATE
According to the instructions
2
connection of
http://www.qhyccd.com/download.html
and install the ASCOM driver of QHY10。
Install AART3.0 and AART4.0 updates. You will
3
copy AART's CCD-link
download from the AART website ) to AATR
installation directory. Then install the driver
AstroART of ASCOM.
Run AstroART software ,select CCD Camera
4
from the ithe Plug-in menu bar, which wll be
appeared the window of CCD Camera Control
Panel. Select types of Imaging/Guide Camera for
ASCOM from the columns of Setup. Click the
button of SETUP, select QHY10 CCD Camera
and set appropriate value of GAIN and OFFSET in
menu bar of Properties, then Click OK.
about driver
ASCOM from
download
library (piccdgui.dll,
34
WWW.QHYCCD.COM