Table of Contents
Advertisement
MAXIMDL ASCOM Connection Mode
Steps
Please download the latest version of the ASCOM
1
Platform from http://ascom-standards.org/. Install
ASCOM and ALSO download any UPDATE that is
available.
http://www.qhyccd.com/download.html
2
and install the ASCOM driver of QHY10。
3
Run MAXIMDL software. Select the camera icon
in the toolbar. The Camera Control window should
appear. Press Setup Camera button inside this
window.
Select ASCOM from the menu of
4
Camera Mode.
Click the button of Advanced
button .Select types of QHY10 CCD from the
window of ASCOM Camera Choose. and then
click the button of Properties to set some usual
value
of
parameters,
GAIN ,OFFSET and the speed of read-out. Click
the button of OK and back to the window Camera
Control, click the button of CONNECT.
Select the columns of Exposure from the window
of Camera Control.
5
31
download
like
the
value
of
Select option of Find Star and set the exposure
6
time
Click to select the "No Calibration" from the popup
7
menu of OPTION.
Set the merge mode with X and Y ,like choose
8
X=4,Y=same.
9
Press the button of Start to exposure and shoot .
When finished shooting, images will be showed.
10
You can use the tool of Screen Stretch to adjust
the stretching of image.
Color Image Taken
The Binning modes of QHY10 include 2x2,4x4.
These two modes only output grayscale image.
So these two modes are only useful for focusing
and previewing. If you want to get a color image,
please select the combine mode 1x1.
32
WWW.QHYCCD.COM
Hide quick links:
Advertisement
Table of Contents
