Blastrac EBE 350 VH Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Blastrac Manuals
  4. Shot Blasting Machines
  5. EBE 350 VH
  6. Operating instructions manual
Blastrac EBE 350 VH Operating Instructions Manual

Blastrac EBE 350 VH Operating Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Operating Instructions
EBE 350 VH
MAN-EBE 350VH-EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EBE 350 VH and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Blastrac EBE 350 VH

Summary of Contents for Blastrac EBE 350 VH

  • Page 1 Operating Instructions EBE 350 VH MAN-EBE 350VH-EN...
  • Page 2 ISPC Blastrac/EBE Utrechthaven 12 3433 PN Nieuwegein THE NETHERLANDS T +31(0)30 - 601 88 66 F +31(0)30 - 601 83 33 E info@surfacepreparation.nl I www.surfacepreparation.com Technical data Safety instructions Nieuwegein General Transport Initial operation Operation Maintenance Electrical systems Fault diagnosis...
  • Page 3 EBE 350 VH Operating Instructions Technical data Contents Chapter 1 1.1 Rating 1.2 Unit specifications 1.3 Operative range and correct usage 1.4 Stand-by power supply (generator) 1.5 Machine type designation 1.6 Advice for operators of blast cleaning machines...

  • Page 4: Unit Specifications

    Operating Instructions EBE 350 VH Technical data 1.1 Rating Unit / designation : ISPC Blastrac/EBE blast cleaning machine Machine type : EBE 350 VH Manufacturer : ISPC Blastrac/EBE Utrechthaven 12 NL-3433PN Nieuwegein THE NETHERLANDS 1.2 Unit specifications Dimensions: Machine EBE 350 VH...

  • Page 5: Operative Range And Correct Usage

    Recommended filter unit : EBE 350 DAAM UNI 1.3 Operative range and correct usage The EBE 350 VH is exclusively designed to clean dry, frost-free vertical surfaces. The machine may not be used for other purposes. The manufacturer will not be liable for damage resulting from such incorrect usage.

  • Page 6: Stand-By Power Supply (Generator

    EBE 350 VH Technical data 1.4 Stand-by power supply (generator) If the EBE 350 VH blast-cleaning machine is operated using a generator, this generator must be operated in accordance with the current VDE directives (this applies to the protective earth...

  • Page 7: Table Of Contents

    EBE 350 VH Operating Instructions Safety instructions Contents Chapter 2 2.0 Warnings and symbols 2.1 Organisational measures 2.2 Personnel selection and qualification 2.3 Safety precautions applicable to different operating conditions 2.4 Special work within the scope of use of the equipment and maintenance activities as well as repairs during operation 2.5 Definition of the Safety off position...

  • Page 8: Warnings And Symbols

    Operating Instructions EBE 350 VH Safety instructions 2.0 Warnings and symbols The following denominations and symbols are used in the Operating Instructions to highlight areas of particular importance: Symbol of operational safety. In these Operating Instructions this symbol will be shown next to all safety precautions that are to be taken in order to ensure prevention to life and injury.

  • Page 9: Organisational Measures

    EBE 350 VH Operating Instructions Safety instructions Warning against dangerous voltages. Indications relating to protective devices in electrical appliances. Indications where consultation with manufacturer is required. Instructions relating to periodical checks. Reference to important instructions contained in the Operating Instructions.
  • Page 10 Operating Instructions EBE 350 VH Safety instructions The Operating Instructions must be supplemented by instructions including the duty to supervise and report relating to particular working practices, for example work organisation, work procedures and personnel allocation. Personnel entrusted with working with the machine must have read the Operating Instructions before starting work, in particular the Safety Instructions chapter.

  • Page 11: Personnel Selection And Qualification

    EBE 350 VH Operating Instructions Safety instructions To perform maintenance work correctly it is imperative to be equipped with the proper tools for the task in question. The location and the operation of fire extinguishers must be made known on each building site! Take note of the facilities for reporting and fighting fires! 2.2 Personnel selection and qualification...
  • Page 12 Operating Instructions EBE 350 VH Safety instructions 2.3 Safety precautions applicable to different operating conditions Ban any method of working that impairs safety! Only operate the machine when all safety devices and related safety equipment, e.g. detachable safety devices, emergency...

  • Page 13: Special Work Within The Scope Of Use Of The Equipment And

    EBE 350 VH Operating Instructions Safety instructions 2.4 Special work within the scope of use of the equipment and maintenance activities as well as repairs during operation Mechanical servicing work: Put the machine in the Safety off position as described in chapter 2.5 for any servicing work on the machine in order to prevent the...

  • Page 14: Definition Of The Safety Off Position

    Operating Instructions EBE 350 VH Safety instructions 2.5 Definition of the Safety off position Definition: The machine is in a safe condition when it cannot generate any hazard. Putting the equipment in the Safety off position means: Close the valve.

  • Page 15: Particular Dangerous Aspects Of The Equipment

    EBE 350 VH Operating Instructions Safety instructions 2.6 Particular dangerous aspects of the equipment Any machine, if it is not used according the regulations, may be hazardous for operating, setting-up and service personnel. The operating authority is responsible for compliance with the...

  • Page 16: Electrical Engineering Regulations

    Operating Instructions EBE 350 VH Safety instructions 2.7 Electrical engineering regulations Work on electrical equipment or operating materials may only be undertaken by a skilled electrician or by trained persons under the guidance and supervision of a skilled electrician as well as in accordance with the electrical engineering regulations.

  • Page 17: Important Safety Precautions

    9. No unauthorized person may operate this machine. Warning ISPC Blastrac/EBE machines build for the American market are special build to run on 440-480V and 60Hz. If the machines are operating on a Voltage or Hz lower than 440V and 60Hz, it will damage the electric components.
  • Page 18 EBE 350 VH Operating Instructions General Contents Chapter 3 Introduction Operating instructions Connections Care and maintenance Scope of supply Description Control box Operating elements Blast wheel 3.10 Separator and hopper 3.11 Elevator 3.12 Drive system 3.13 Abrasive sealing 3.14 Air suction and filter system...

  • Page 19: Introduction

    General 3.1 Introduction ISPC Blastrac/EBE wants to thank you for your decision to employ the blast cleaning machine EBE 350 VH for the treatment of vertical surfaces. The machine has a closed abrasive circuit with dust separation. This comprehensively avoids damaging the environment and endangering the operating staff.

  • Page 20: Connections

    A list of contents of the maintenance box is provided in Chapter 10 to enable the above-mentioned work to be carried out quickly. WARNING: ISPC Blastrac/EBE machines build for the American market are especially build to run on 440-480V 60Hz. If the machines are operating on a Voltage or Hz lower than 440V and 60Hz, this will damage the electric components.

  • Page 21: Scope Of Supply

    Operating Instructions EBE 350 VH General 3.5 Scope of supply Scope of supply of the machine: Blast cleaning machine (EBE 350 VH) Dust hose Operating instructions (2 x) Maintenance box (option) 3.6 Description Fig. 3.1 Hoist beam Abrasive hopper Bobbin frame...
  • Page 22 EBE 350 VH Operating Instructions General The ISPC Blastrac/EBE blast-cleaning machine EBE 350 VH is a blast machine with a closed abrasive circuit designed for the pre- treatment of vertical surfaces. The bouncing impact of metallic abrasive onto the surface to be treated thoroughly removes surface contaminants, coats of paint, sealants and thin coatings.

  • Page 23: Control Box

    Operating Instructions EBE 350 VH General 3.7 Control box The control box is equipped with all control elements and instruments for monitoring and controlling the blast-cleaning machine. Fig. 3.3 Ammeter Push button “Elevator ON” Push button “Main blast ON” Push button “Elevator OFF”...
  • Page 24 EBE 350 VH Operating Instructions General Push buttons ”Elevator ON/OFF” Pressing the push button “Elevator ON” starts the elevator motor to drive the bucket elevator. Pressing the push button “Elevator OFF” stops the elevator motor, and thus the bucket elevator.

  • Page 25: Operating Elements

    Operating Instructions EBE 350 VH General 3.8 Operating elements The shot valve Between the abrasive storage hopper and the blast housing there is a valve in order to control the abrasive flow towards the blast wheel. Any change in the opening of the valve causes the amount of abrasive fed to the blast wheel to change.
  • Page 26 EBE 350 VH Operating Instructions General 3.9 Blast wheel The heart of the blast cleaning machine is a blast wheel that throws the abrasive onto the surface to be cleaned by using centrifugal force. The blast wheel is placed in a protective housing lined with replaceable wear parts.

  • Page 27: Separator And Hopper

    Operating Instructions EBE 350 VH General 3.10 Separator and hopper The abrasive separator is part of the top of the elevator housing. It separates the abrasive from contaminants and feeds the cleaned abrasive back to the abrasive storage hopper. Fig. 3.7...
  • Page 28 EBE 350 VH Operating Instructions General 3.11 Elevator The function of the elevator is to convey abrasive and debris to the top of the machine. In addition the elevator housing provides airflow through the machine. Fig. 3.8 Tension bearing Elevator bucket...

  • Page 29: Drive System

    Operating Instructions EBE 350 VH General 3.12 Drive system The drive system is for moving the machine left or right. The drive rollers are operated with the joystick on the remote control box. Fig. 3.9 Drive motor Drive roller Proximity switch...

  • Page 30: Abrasive Sealing

    EBE 350 VH Operating Instructions General 3.13 Abrasive sealing The seal system comprises of four polyurethane seals to ensure that good sealing is maintained between the blast mouth and the work surface to be blasted. The seals are fixed in a seal box at the front of the blast opening of the cabinet and are clamped into place by nuts and straps.
  • Page 31 Operating Instructions EBE 350 VH General Mouth seal system: The mouth seal is fixed to the blast mouth with nuts and bolts. To replace it, unscrew the nuts and remove the mouth seal. The brush is fixed to the blast mouth with nuts. Replace the brush if necessary.

  • Page 32: Air Suction And Filter System

    EBE 350 VH Operating Instructions General 3.14 Air suction and filter system The air streaming through the complete system, created by an exhaust fan on the dust arrestor, has the following functions: Cooling of the blast wheels Cooling of the abrasive...
  • Page 33 Operating Instructions EBE 350 VH General The air stream flows through the rebound plenum and carries along abrasive and dust. In doing so the air stream cools the abrasive and the housing walls. Fig. 3.12 At the top of the elevator housing the air enters the separator, separates the fine dust from the abrasive and transports the dust to the outlet opening.

  • Page 34: Abrasive Media

    Operating Instructions General 3.15 Abrasive media In order to operate the ISPC Blastrac/EBE machine EBE 350 VH you need hardened (max. 45 Rockwell), spherical abrasive. The machine EBE 350 VH has been especially designed to be operated with ISPC Blastrac/EBE abrasive.
  • Page 35 Operating Instructions EBE 350 VH General Selection of abrasive Abrasive shot S330 - S390 - S460: Standard abrasive, suitable for about 50-60 % of all applications. Applications: removes coatings with a thickness of 1-3 mm and cleaning of steel surfaces Abrasive shot S330 - S390 - S460 with SG25 - SG18 - SG16: For removal of coatings from steel surfaces mix approx.
  • Page 36 EBE 350 VH Operating Instructions General The effectiveness of the EBE 350 VH depends on the rebound effect, which ensures that the abrasive can be re-used. Please take into account that the use of incorrect abrasive increases wear. Our service engineers have the experience to select the appropriate abrasive for the individual cases of application.
  • Page 37 EBE 350 VH Operating Instructions Transport Contents Chapter 4 4.1 General notes 4.2 Transport 4.3 Operation conditions 4.4 Operation 4.5 Unit specifications...
  • Page 38 EBE 350 VH Transport 4.1 General notes Before the machine is used for the first time, ISPC Blastrac/EBE authorised dealers offer a course to familiarise maintenance and operating personnel with all elements of the machine. We are not liable for damage caused by incorrect use of the machine by personnel not trained by ISPC Blastrac/EBE.
  • Page 39 EBE 350 VH Operating Instructions Transport 4.3 Operation conditions Check the surface to be treated for loose parts. The surface must be swept if necessary. Make sure that the machine can travel over all inequalities on the surface. Small inequalities like weld seams are no barriers for the machine.
  • Page 40 EBE 350 VH Operating Instructions Initial operation Contents Chapter 5 5.1 Preparations for initial operation 5.2 Initial operation...
  • Page 41 Operating Instructions EBE 350 VH Initial operation 5.1 Preparations for initial operation Before switching on make sure that all existing protective housings are mounted and that the filter unit is connected correctly. All persons in the proximity of the machine must wear ear protectors, safety glasses with lateral protection as well as safety shoes.
  • Page 42 EBE 350 VH Operating Instructions Initial operation Check the tightness of the hose connections and the condition of the hose to the filter. Make sure the dust container of the filter unit is empty. Check the separator parts for wear and defects. Remove foreign bodies and dust deposits in order to prevent the separator from being blocked.
  • Page 43 Operating Instructions EBE 350 VH Initial operation Before start-up the operating personnel must be familiar with the safety regulations given in this manual. The blast cleaning machine needs to be suspended from a lifting system such as a mobile crane, dockside crane or system built lifting beam.
  • Page 44 If the ammeter indicates high load consumption after having reached the idle-running speed, the shot valve may be partially open or there may be another disturbance. Find out the cause of the disturbance and, if necessary, contact your ISPC Blastrac/EBE customer service engineer.
  • Page 45 Operating Instructions EBE 350 VH Initial operation By means of the remote control, check the movement of the machine. Blast cleaning is carried out in a down mode. Working direction Fig. 5.2 When the machine is travelling, push the abrasive control button “+”...
  • Page 46 EBE 350 VH Operating Instructions Initial operation Control the speed of movement in a vertical mode (down) by means of the remote control, to such an extent that the blast cleaning quality is achieved, i.e. slow movement = better quality. This applies only when the optional winch is fitted, otherwise the mobile crane operator controls the speed of the machine.
  • Page 47 EBE 350 VH Operating Instructions Operation Contents Chapter 6 6.1 Operation 6.2 Switching-off the machine 6.3 Removing the hoisting cable 6.4 What to do if a fault occurs 6.5 Safety shutdown 6.6 Restarting after a fault 6.7 Measures before and after long standstills...
  • Page 48 Operation 6.1 Operation Normal start-up and operation of the blast machine EBE 350 VH is no different from the procedure described in Chapter 5 “Initial operation”. Carry out blasting in parallel tracks in such a way that the dust hose and electric cable do not become twisted.
  • Page 49 Make sure that all turning machine parts have come to standstill before any inspection or maintenance works are started. When the ISPC Blastrac/EBE blast cleaning machine is put out of operation for a longer period of time, pull out the mains plug and cover the machine with a plastic foil.
  • Page 50 Operating Instructions EBE 350 VH Operation 6.4 What to do if a fault occurs Irrespective of the following information, the local safety regulations are valid in any case for the operation of the machine. First put the machine to its Safety off position. After that start looking for the defect.
  • Page 51 EBE 350 VH Operating Instructions Operation 6.7 Measures before and after long standstills Standstill of the machine for a maximum of 3 months. Before a long standstill period Switch off the machine (see Chapter 6.4). Protect the electric motors from moisture, heat, dust and shocks.
  • Page 52 EBE 350 VH Operating Instructions Maintenance Contents Chapter 7 7.1 Recommendations 7.2 Maintenance and inspection list 7.3 Repairing 7.4 The blast pattern 7.5 Setting the blast pattern 7.6 Setting the control cage 7.7 Wear parts 7.8 Blastwheel blades & Impeller replacement...
  • Page 53 Operating Instructions EBE 350 VH Maintenance 7.1 Recommendations With maintenance and inspection works, please observe Chapter 2 "Safety instructions". Failures due to inadequate or incorrect maintenance may generate very high repair costs and long standstill periods of the machine. Regular maintenance is therefore imperative.
  • Page 54 EBE 350 VH Operating Instructions Maintenance 7.2 Maintenance and inspection list Operating hours/ Inspection points, maintenance time period instructions 12 h after repairing Check the efficiency of all safety devices. Check all accessible screw connections for tight seat. every 3 h...
  • Page 55 As already mentioned in Chapter 5 “Initial operation” we recommend to execute the first repair works on the machine with the help of ISPC Blastrac/EBE personnel. With this your maintenance personnel gets the opportunity to be trained intensely. Only those repair works are described which occur within the context of maintenance or which are required to replace wear parts.
  • Page 56 Correct adjustment of the control cage and thus of the blast pattern is the most important factor for optimum working with the EBE 350 VH blast cleaning machine. Incorrect adjustment of the control cage results in very high wear and...
  • Page 57 Operating Instructions EBE 350 VH Maintenance Every time the control cage is replaced, the thread of the blast wheel fastening screw should be checked. Make sure that this screw will be tightened correctly. In addition, absolute care must be taken to clean the thread from dust and abrasive.
  • Page 58 EBE 350 VH Operating Instructions Maintenance The following 4 factors affect the blast pattern: Turning direction of the blast wheels: The turning direction of the blast wheel must correspond to the instructions on the housing (arrow indicating the turning direction).
  • Page 59 Operating Instructions EBE 350 VH Maintenance 7.6 Setting the control cage The adjustment is effected by loosening the cage clamps and turning the control cage in the suitable direction. The cast groove on the control cage shows the central position of the control cage opening.
  • Page 60 EBE 350 VH Operating Instructions Maintenance Move the blast head of the blast machine onto a 5-8 mm thick steel plate and blast for 15 seconds at full amperage without moving the machine from the spot. Stop the abrasive flow and move the machine until the blasted area is accessible.
  • Page 61 Operating Instructions EBE 350 VH Maintenance 7.7 Wear parts The blast wheel parts Fig. 7.3 Impeller bolt Control cage clamp Control cage Impeller Blades (set of 6) Blast wheel Taper lock adapter Parallel key Taper lock bush...
  • Page 62 EBE 350 VH Operating Instructions Maintenance The liners Fig. 7.4 Top liner Right liner Left liner...
  • Page 63 Operating Instructions EBE 350 VH Maintenance 7.8 Blastwheel blades & Impeller replacement During operation the blast wheel blades and the impeller will wear. To replace worn components: Make sure the power unit is stopped and the main electricity supply disconnected.
  • Page 64 EBE 350 VH Operating Instructions Maintenance 7.9 Changing the liners Fig. 7.5 1 Top liner cover 2 Top liner 3 Left liner 4 Right liner Unscrew the top liner cover and remove it. Take the top liner out of the blast housing.
  • Page 65 EBE 350 VH Operating Instructions Electrical systems Contents Chapter 8 8.1 Circuit diagrams...
  • Page 66 Operating Instructions EBE 350 VH Electrical systems 8.1 Circuit diagrams...

  • Page 67: Front Page

    Particulars: PROJECT Client USF BLASTRAC / EBE Name Blastmachine EBE 350 VH/ Supplier USF BLASTRAC / EBE SUPPLIER Contact Telephone +31(0)30-6018866 Draw.number 350-9110-VH/UNI Telefax +31(0)30-6018333 Order number Email info@usfebe.nl DATA Arch.number PJ02.01745T1B Calc.number Status As built Start of project 18.07.2002...

  • Page 68: Rjo Rjo

    14.08.2003 Terminal strip X3 14.08.2003 Plug X4 14.08.2003 Materiaallijst 14.08.2003 Materiaallijst 14.08.2003 Start 18.07.2002 Arch.nr. USF BLASTRAC / EBE Table of contents PJ02.01745T1B Eng. Blastmachine EBE 350 VH/ Draw.nr. Pages Page Print 14.08.2003 350-9110-VH/UNI Change Date Name Status As built...
  • Page 69 -Dark blue -Grey Potential free: Revision letter Serial number Potential free -Orange Archive number Start 18.07.2002 Arch.nr. USF BLASTRAC / EBE Explanations PJ02.01745T1B Eng. Blastmachine EBE 350 VH/ Draw.nr. Pages Page Print 14.08.2003 350-9110-VH/UNI Change Date Name Status As built...
  • Page 70 Short-circuit and NO / NC overcurrent protection Thermostat NO / NC Engine Autotransformer Start 18.07.2002 Arch.nr. USF BLASTRAC / EBE Symbol explanation PJ02.01745T1B Eng. Blastmachine EBE 350 VH/ Draw.nr. Pages Page Print 14.08.2003 350-9110-VH/UNI Change Date Name Status As built...
  • Page 71 1,5ý 0,75ý 0,75ý 0,75ý 0,75ý Supply Supply Supply Supply 480V 60Hz. 24Vac. 24Vdc. 12Vdc. Start 18.07.2002 Arch.nr. USF BLASTRAC / EBE Main-voltage PJ02.01745T1B Eng. Blastmachine EBE 350 VH/ Draw.nr. Pages Page Print 14.08.2003 350-9110-VH/UNI Change Date Name Status As built...
  • Page 72 1,5ý Ï Ï Ï Ï Ï Ï Ï Elevator Blast Traverse motor motor motor Start 18.07.2002 Arch.nr. USF BLASTRAC / EBE Main-voltage PJ02.01745T1B Eng. Blastmachine EBE 350 VH/ Draw.nr. Pages Page Print 14.08.2003 350-9110-VH/UNI Change Date Name Status As built...
  • Page 73 5.4/0VDC-A 5.6/12VDC-B 5.5/0VDC-B 10K1 10K2 10.1 10.2 1,5A/F MCR-SL- D-U/I MCR-S- 10/50-UI Shotvalve actuator Start 18.07.2002 Arch.nr. USF BLASTRAC / EBE Main-voltage PJ02.01745T1B Eng. Blastmachine EBE 350 VH/ Draw.nr. Pages Page Print 14.08.2003 350-9110-VH/UNI Change Date Name Status As built...
  • Page 74 8ES1 Emergency Stop Emergency Stop XPS- AS5140 5.3/24VAC-B 24VAC-B /9.0 9 8.7 11 8.5 Start 18.07.2002 Arch.nr. USF BLASTRAC / EBE Control-voltage PJ02.01745T1B Eng. Blastmachine EBE 350 VH/ Draw.nr. Pages Page Print 14.08.2003 350-9110-VH/UNI Change Date Name Status As built...
  • Page 75 56 9.6 54 10.1 22 9.5 54 9.3 68 9.5 62 10.3 54 9.4 Start 18.07.2002 Arch.nr. USF BLASTRAC / EBE Control Voltage PJ02.01745T1B Eng. Blastmachine EBE 350 VH/ Draw.nr. Pages Page Print 14.08.2003 350-9110-VH/UNI Change Date Name Status As built...
  • Page 76 9 7.1 9 7.2 9 10.2 9 9.3 10 7.2 10 7.3 10 10.4 Start 18.07.2002 Arch.nr. USF BLASTRAC / EBE Control Voltage PJ02.01745T1B Eng. Blastmachine EBE 350 VH/ Draw.nr. Pages Page Print 14.08.2003 350-9110-VH/UNI Change Date Name Status As built...

  • Page 77: Terminal Strip X1

    Internal connection Bridges Terminal Start 18.07.2002 Arch.nr. USF BLASTRAC / EBE Terminal strip X1 PJ02.01745T1B Eng. Blastmachine EBE 350 VH/ Draw.nr. Pages Page Print 14.08.2003 350-9110-VH/UNI Change Date Name Status As built...

  • Page 78: Terminal Strip X2

    Internal connection Bridges Terminal Ï Start 18.07.2002 Arch.nr. USF BLASTRAC / EBE Terminal strip X2 PJ02.01745T1B Eng. Blastmachine EBE 350 VH/ Draw.nr. Pages Page Print 14.08.2003 350-9110-VH/UNI Change Date Name Status As built...

  • Page 79: Terminal Strip X3

    Internal connection Bridges Terminal 9ES1 9ES2 10ES1 10ES2 10ES3 Start 18.07.2002 Arch.nr. USF BLASTRAC / EBE Terminal strip X3 PJ02.01745T1B Eng. Blastmachine EBE 350 VH/ Draw.nr. Pages Page Print 14.08.2003 350-9110-VH/UNI Change Date Name Status As built...

  • Page 80: Status As Built

    Internal connection Bridges Terminal 8ES1 10S2 Start 18.07.2002 Arch.nr. USF BLASTRAC / EBE Plug X4 PJ02.01745T1B Eng. Blastmachine EBE 350 VH/ Draw.nr. Pages Page Print 14.08.2003 350-9110-VH/UNI Change Date Name Status As built...
  • Page 81 9KS1 02.02.0118 LAD-N11 1m/1v voor LC1-D09..LC1-D38 Telemecanique 15.02.0024 XB5-DSB Urenteller 12/24V ac/dc 22mm. Telemecanique Start 18.07.2002 Arch.nr. USF BLASTRAC / EBE Materiaallijst PJ02.01745T1B Eng. Blastmachine EBE 350 VH/ Draw.nr. Pages Page Print 14.08.2003 350-9110-VH/UNI Change Date Name Status As built...
  • Page 82 10.1 08.01.0091 ZB5-AA0 zonder drukplaat Telemecanique 10S2 10.1 08.12.0053 ZB5-AZ105 1m/1v met koppelstuk Telemecanique Start 18.07.2002 Arch.nr. USF BLASTRAC / EBE Materiaallijst PJ02.01745T1B Eng. Blastmachine EBE 350 VH/ Draw.nr. Pages Page Print 14.08.2003 350-9110-VH/UNI Change Date Name Status As built...
  • Page 83 EBE 350 VH Operating Instructions Fault diagnosis Contents Chapter 9 9.1 Fault diagnosis - blast machine 9.2 Fault diagnosis - electrical system...
  • Page 84 Operating Instructions EBE 350 VH Fault diagnosis 9.1 Fault diagnosis - blast machine Prior to any repair works on the machine or its drives the machine must be secured against unintentional switching-on. Put the machine to its Safety off position.
  • Page 85 EBE 350 VH Operating Instructions Fault diagnosis Fault Possible cause Remedy Reduced or no Blast wheel or control Worn blast wheel or blasting cage. control cage, replace performance worn parts if necessary. Adjustment of the shot Check the adjustment of valve.
  • Page 86 Operating Instructions EBE 350 VH Fault diagnosis Fault Possible cause Remedy Excessive Wrong abrasive. Contact ISPC wear in blast Blastrac/EBE. housing and recovery duct Incorrect setting of the The thrown abrasive control cage blasts the housing and not the surface to be blasted.
  • Page 87 EBE 350 VH Operating Instructions Fault diagnosis Fault Possible cause Remedy Control Connection cable is Replace the cable. system defective. switches off during Cables connecting the Replace the cable. operation units (travel motor, etc.) are defective. Motor protection switch Have the fault checked have triggered.
  • Page 88 EBE 350 VH Operating Instructions Spare parts Contents Chapter 10 10.1 Spare parts...
  • Page 89 Operating Instructions EBE 350 VH Spare parts 10.1 Spare parts Blast housing and seals Item Part no. Description Qty. 350-1073-V Innerseal top 350-1510-VH Innerseal strap top 350-1077-V Innerseal left/right 350-1079-VH Innerseal strap left/right 350-1511-VH Innerseal strap bottom 350-1074-V Innerseal bottom...
  • Page 90 EBE 350 VH Operating Instructions Spare parts Fig. 10.1...
  • Page 91 Operating Instructions EBE 350 VH Spare parts Blast wheel parts and liners Item Part no. Description Qty. 350-1245-SEV Impeller bolt 350-9041 Cage clamp 350-1010 Control cage 350-1015 Impeller 350-1005 Blades (set of 6) 350-1025 Blastwheel 222-2265 Taperlock adapter blastwheel 222-2290...
  • Page 92 EBE 350 VH Operating Instructions Spare parts Separator and hopper Item Part no. Description Qty. Separator (part of elevator housing) E00971 Baffle plate 350-1067-VH Abrasive storage hopper Door lock (part of hopper) 350-9240-VH Shot valve axle housing 222-2080-V Bearing seal...
  • Page 93 Operating Instructions EBE 350 VH Spare parts Fig. 10.3...
  • Page 94 EBE 350 VH Operating Instructions Spare parts Elevator Item Part no. Description Qty. 222-2243-V Elevator tension bearing 350-9250-VH Metal sealing for tension bearing 350-9056-VH Elevator support roll 350-2248-VH Support shaft bottom pulley 350-9055-VH Elevator drive roll 222-2242-V Bearing for elevator & bobbin...
  • Page 95 Operating Instructions EBE 350 VH Spare parts Fig. 10.4...
  • Page 96 EBE 350 VH Operating Instructions Spare parts Blast wheel drive Item Part no. Description Qty. 350-3020-VH Blastmotor 11kW 350-2170-VH Belt pulley (50Hz) 350-2182-V Belt pulley (60Hz) 222-2290 Blastwheel shaft taperlock bush 350-2431-V Blastmotor belt (set of 3) 350-9255-VH Blastwheel belt guard...
  • Page 97 Operating Instructions EBE 350 VH Spare parts Drive system Item Part no. Description Qty. 350-2010-SEV Front wheel castor complete 350-2012-V Front wheel spacer block 350-2014-V Front wheel spacer 5mm E00938 Magnet front cover 350-2515-VH Magnet E00937 Magnet rear cover 350-1116-VH...
  • Page 98 EBE 350 VH Operating Instructions Spare parts Fig. 10.6...
  • Page 99 Operating Instructions EBE 350 VH Spare parts Protection frame, Hoist arm & Electrical components Item Part no. Description Qty. 350-9505-VH Hoist beam complete Protection frame (part of machine) 035-3191-VH Abrasive valve actuator 035-3192 Actuator motor 035-3193-VH Actuator motor cover (set of 2)

Table of Contents