Installation; Mounting; Functions And Settings; Operation And Set Base - ProLights ARTNETNODE User Manual

6

- 2 - INSTALLATION

2.1 MOUNTING

The ARTNETNODE is used as part of a control system for operating various lighting and multi-media prod-
ucts. The physical and digital construction of the control network is determined by the location and signal
needs of the products.
When designing a control system that uses the ARTNETNODE, consider the following:
• Placing the ARTNETNODE so the menu and ports can be accessed
• Running the cables so there is no tension or pull on the cables or plugs
• Planning a large control system carefully before configuring the components, so IP address, DMX ad-
dress, and other identifiers are not duplicated
The ARTNETNODE fits nicely in a standard 19" rack, or sits on a flat surface. The unit should be placed
where the menu and the ports are accessible, and where there is adequate ventilation.

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION AND SET BASE

Connect the supplied main cable to a socket (100-240V~/50-60Hz). Switch on the unit with the power
switch. After operation, switch off the unit with the power switch.
The ARTNETNODE has a LCD display and 4 button used to access the control panel functions and manage
them (fig.3).
MENU
Scrolls through the first
level of options, or exits
from the current menu or
function
ARTNETNoDE
ML-ArtNet8
V 0.1
UP
Navigates upwards through
the menu list and increases
the numeric value when in a
function
UP
MENU
DOWN
DOWN
Navigates downwards
through the menu list and
decreases the numeric value
when in a function
ENTER
ENTER
Enables the currently
displayed menu or sets the
currently selected value in to
the current function
Fig.4 - Functions of the buttons