Power Connection - Swegon GOLD RX/HC Series Installation And Maintenance Instructions Manual

4. POWER CONNECTION

The cross-sectional dimension of the power supply cable
should take into consideration the ambient temperature
and way the cable is run.
Cables must be routed safely. Make sure that the cables
do not touch components, since surfaces could be hot or
vibrate.
The connection of RX/HC is shown here. For the connec-
tion of the GOLD air handling unit, see the installation
instruction GOLD.
Size 011-020
Dismantle the connection hood to RX/HC.
Connect the incoming power supply to the safety switch,
see the illustration.
5-core system, 400 V ±10%. Also see section 10 Technical
data.
Possible locations of the
connection hood RX/HC
10 www.swegon.com
Important:
Installation must be carried out by a authorised electri-
cian.
Dismantle the connec-
tion hood to RX/HC
Connect the incoming power
supply to the safety switch
GB.RXHCF.191011
We reserve the right to alter specifications.