Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Lebensstil Kollektion LKCH-9108SS
Summary of Contents for Lebensstil Kollektion LKCH-9108SS
- Page 1 Operating Instructions COOKER HOOD Model: LKCH-9108SS...
- Page 2 INSTALLATION GUIDE All installation jobs must be carried out by qualified technical personnel. The reference installation height from cook-top to hood base is 65cm ~ 75cm. Set the cooker hood and cook-top in the horizontal direction with the specified height given.
- Page 4 PARTS IDENTIFICATION TECHNICAL DATA Rated Voltage 240VAC ~ 50Hz Rated Power 283W Motor 280W Lighting 3W LED (1 X 3W) Heating Power Suction Power 1650+/-60m3/hr Exhaust Outlet 180mm Dia. Air Flow 1980m3/hr max.
- Page 5 OPERATION OF SENSOR TOUCH SWITCH SELECTOR 1. On/Off/Timer/Setting: a) To switch On and Off the hood’s operation. b) To activate Delay Timer, press On/Off for 3 seconds when cooker hood is still running and it will switch off automatically. The 1-minute preset delay run time can be used after you finish cooking to clear cooking odours in the kitchen.
- Page 6 MAINTENANCE AND CARE ● Heavy grease on filters will result in poor suction performance, noise and may cause fire hazard! ● The attached Oil Cup must be checked, where the collected oil must be discarded and cleaned regularly. ● Clean the cooker hood surface with mild detergent and damp cloth. A final wipe with a clean damp cloth and dry cloth is necessary.
Need help?
Do you have a question about the LKCH-9108SS and is the answer not in the manual?
Questions and answers
My cooking hood not working
The Lebensstil Kollektion LKCH-9108SS cooker hood may not be working due to several possible reasons:
1. Power Supply Issue – Ensure the cooker hood is connected to the main power supply and switched on.
2. Faulty Electrical Components – The switch, motor, or main cable may have issues. Only genuine parts should be used for replacement.
3. Grease Saturation – If suction power has dropped due to grease buildup, the filters and oil cup should be cleaned or replaced.
4. Installation Issues – Ensure that the hood is securely mounted, the exhaust outlet is properly assembled, and the outlet pipe is not excessively bent.
5. Faulty Light Bulb – If the light does not work, replace it with a 3W LED bulb.
6. Improper Operation – Check if the correct buttons are being pressed for turning on the hood and adjusting suction speed.
If the issue persists, a qualified technician should inspect and perform maintenance.
This answer is automatically generated