Advertisement
Quick Links
Erkoform-3dmotion
Erkoform-3dmotion
Vacuum thermoforming
unit with touchless
temperature control
(EP 1 905 380),
pre-vacuum, touchpanel
and automated
thermoforming process
Granules pot*, Ø inside 97 mm
height inside 40 mm
Erkodent Erich Kopp GmbH • Siemensstraße 3 • 72285 Pfalzgrafenweiler • Germany
Tel.: +49 (0) 74 45 85 01-0 • Fax: +49 (0) 74 45 20 92 • www.erkodent.com • info@erkodent.com
Main switch
Granules collecting device
Model plate* for very flat trimmed models
Instructions
Medium-wave infrared
heater with cover
Foil reception handle with
cavity for good grip
Mains connection (back)
Foil reception with
foil securing ring
Sensor window for
temperature registration
Column for movement of
foil reception
Form pot for reception of
granules pot, model plate
and Occluform-3 model pot
(Occluform-3, 188 580)
Touchpanel to operate all
functions
*also included
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for erkodent Erkoform-3dmotion
Summary of Contents for erkodent Erkoform-3dmotion
- Page 1 Model plate* for very flat trimmed models height inside 40 mm *also included Erkodent Erich Kopp GmbH • Siemensstraße 3 • 72285 Pfalzgrafenweiler • Germany Tel.: +49 (0) 74 45 85 01-0 • Fax: +49 (0) 74 45 20 92 • www.erkodent.com • info@erkodent.com...
- Page 2 The construction of the Erkoform-3dmotion unit complies to the applicable legal standards. Security hints Risk of burns, do not touch heater, housing of the heater and hot foils!
- Page 3 Recommendation: Operate the machine only with granules (illustr.) To fill the granules pot move the foil reception in the upper right position. Smooth the granules, excessive granules will fall in the surrounding chanel and can be swept with the brush in the granules collecting device.
- Page 4 Erkodur, thickness 1 mm Select foil Thumb list of foils The list of foils contains all foils of the Erkodent range of products that can be used with this machine and that have been available at the time of production of this unit.
- Page 5 Thermoforming (see also page 10) 1. Correct foil (?), 2. Foil will be heated. Attention! 4. Cooling time confirm. Thermoforming pro- As soon as the foil After the thermoform- cess As soon as the foil reception clearly ing process the is confirmed the dis- clicks into place 10 °C before the...
- Page 6 ”select foil“. New foils, either future Erkodent foils or foreign foils, are entered with the functional field ”new foil“ and are saved in the list of favourites.
- Page 7 Enter new foils New foils can be future Erkodent foils or foreign foils. If Erkodent launches new foil the necessary data will be found on the label (example: Erko new, thickness 1.8 mm, rated temperature 150 °C, cooling time 1:40 min.).
- Page 8 Change factory settings for foils The rated temperature and cooling time can be changed for one single thermoforming process or constantly as a favourite. The rated temperature (factory presetting) can only be changed by maximum +/- 5 °C. The changes are done in the window „selected foil“ or „favourite“, also see “select foil”...
- Page 9 Special functions Using special functions the heating and the vacuum pump can be switched on and off independently of the program. To determine the rated temperature (thermoforming temperature) of an unknown foil, select „heating on“ and clamp the foil in the foil frame as mentioned under „thermoforming“.
- Page 10 Trouble shooting: elimination error possible reason (after sales service = ass) check wall socket, machine machine not ready to use, wall socket, machine plug or plug, fuses (at the machine plug) no display in the touchpanel fuses defective foil reception has to clearly click heating does not switch on foil reception not in the into place under the heating,...
- Page 11 Thermoforming with Occluform-3 1. Select list of foils 2. Thumb list of foils 3. Select Erkoloc-pro 4. Select thickness 3.0 mm 5. Select Occluform 6. Continue, thermoform- ing*, swivel foil reception under the heating ... 7..until it clicks into 8.
- Page 12 Delivery form for Erkoform-3dmotion please check concerning completeness Piece: Article: Order number: Erkoform-3dmotion 188 400 with accessories as follows: foil securing ring 188 550 to fix the foils in the foil reception granules collecting device 188 570 model plate 188 507...
Need help?
Do you have a question about the Erkoform-3dmotion and is the answer not in the manual?
Questions and answers