Sony Ericsson P990i Working Instruction, Mechanical page 52

Working Instruction, Mechanical
Touch Panel asm + Frame continued
Detach all four (two on each side of the LCD) hooks until
the touch screen is loose on all sides.
Remove the touch screen by hand.
INSTALLATION
When installing the new touch screen, do not touch the
inside of the touch screen or the LCD surface.
Use an ionized air gun or blower to remove any dust.
Mount the new touch screen on the LCD.
If it doesn't fit right on it might help to press on one of the
hooks with the dentist hook.
D !
O NOT USE FORCE
Make sure the touch panel is correctly mounted over the
LCD.
3/000 21-1/FEA 209 544/97 A 52(62)
©
Sony Ericsson Mobile Communications AB