Flash Flex Asm - Sony Ericsson P990i Working Instruction, Mechanical

Working Instruction, Mechanical

3.20 Flash Flex asm

REMOVAL
Follow the 2.1.1 – 2.1.4 Disassembly instructions!
Follow the 3.14 & 3.16 Removal instructions!
Use the front opening tool to disconnect the board-to-board
connector from the main PBA.
Remove the flash flex by hand.
INSTALLATION
Connect the new flash flex to the board-to-board connector.
Use your finger to gently press on the board-to-board
connector to make a secure connection.
Follow the 3.16 & 3.14 Installation instructions!
Follow the 4.1.2 - 4.1.5 Reassembly instructions!
3/000 21-1/FEA 209 544/97 A 32(62)
©
Sony Ericsson Mobile Communications AB