Checking The Fluid Level When The Fluid Is Hot; Checking The Fluid Level When The Fluid Is Cold; Recommended Fluid - Subaru Impreza 2.2L MT Owner's Manual

Subaru 1999 car owner's manual
Table of Contents

Advertisement

J Checking the fluid level when the fluid is hot
Check the fluid level monthly.
1. Drive the vehicle several miles to raise the temperature of the trans-
mission fluid up to normal operating temperature; 140 to 176 F (60 to 80
C) is normal.
2. Park the vehicle on a level surface and set the parking brake.
3. First shift the selector lever in each position. Then shift it in the "P"
position, and run the engine at idling speed.
4. Pull out the dipstick and check the fluid level on the gauge. If it is be-
low the lower level on the "HOT" range, add the recommended automat-
ic transmission fluid up to the upper level.
J Checking the fluid level when the fluid is cold
When the fluid level has to be checked without time to warm up the auto-
matic transmission, check to see that the fluid level is between the lower
level and upper level on the "COLD" range. If it is below that range, add
fluid up to the upper level. Be careful not to overfill.
J Recommended fluid
"Dexron II" or "Dexron III" Type Automatic Transmission Fluid
HGA007BB
Maintenance and service
Upper
level
Lower
Upper
level
level
Lower
level
OM-H0207
– CONTINUED –
10-23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents