Advertisement
Caution
Shorten the gas piping and power code as short as possible,
Shorten the gas piping and power code as short as possible,
do not extend.
do not extend.
Especially, do not let the gas pipe and power code pass the underside,
upper side of product or around exhaust pipe.
By melting gas hose or power code with high temperature, it may cause
fire by short circle or gas leakage.
Do not use the door open.
Do not use the door open.
By malfunctioning of sensor, it may cause poor rice cooking
or product damage.
Do not use in windy place
Do not use in windy place
(in front of window or fan)
(in front of window or fan)
It may cause damage of inner product and
malfunctioning.
Ventilate often during using.
Ventilate often during using.
The waste gas and oxygen deficiency cause carbon monoxide poisoning.
Install the products where is horizontal and securely fixed.
Install the products where is horizontal and securely fixed.
Especially, install the product in well- ventilated place.
If you use insecure place such as in the car or ship, it may cause fir or
burns.
Check the open-close condition of intermediate gas valve.
Check the open-close condition of intermediate gas valve.
Check the valve-open before using, and valve-close after using.
When you igniting, check the ignition condition by ignition checking lamp
Whe
n you igniting, check the ignition condition by ignition checking lamp
(
(
) at the 30cm away from the product.
) at the 30cm away from the product.
Please re-ignite after leaked gas losing(Around 5 sec) when you failed to
ignite in 2-3 times In case of day very humid(rainy season), it could be
failed to ignite due to moisture in ignition part.
Also, in case that rice-cooker hasn't been used long time, Ignition could
be failed due to air in gas pipe.
Please ignite repeatedly at this time.
Take care not to be transformed the lid of rice pot.
Take care not to be transformed the lid of rice pot.
In unavoidably situation, load up under 4 layer.
Close the door slowly and right.
Close the door slowly and right.
If the door does not close right, the heat in combustor is leak, it may
cause breakdown such as transform, discolor and there is danger of
burns.
Take care that the power code not to be touched back side of product
Take care that the power code not to be touched back side of product
like exhaust pipe.
like exhaust pipe.
By melting power code with high temperature of exhaust pipe, it may
cause breakdown and fire by short circle.
Hide quick links:
Advertisement
