Sub-Zero Undercounter Refrigeration Use & Care Information Manual page 12

S U B - Z E R O
C L E A N I N G
S T A I N L E S S S T E E L E X T E R I O R
To clean the classic stainless steel exterior,
use a soft, nonabrasive stainless steel cleaner
like Signature Polish and apply with a soft
100% lint-free cloth. To bring out the natural
S I G N AT U R E
luster, lightly wipe the surface with a water-
P O L I S H
dampened microfiber cloth followed by a dry
polishing chamois. All work should follow the
Signature Polish
grain direction of the finish. Better results are
is available from
obtained by keeping the cloth in continuous
Signature Limited
contact with the stainless steel.
Laboratory,
P. O. Box 13436,
Dayton, Ohio
45413-0436, or
877-376-5474
(toll free).
12
U N D E R C O U N T E R
Under no circumstances should you use
a metallic or highly abrasive cleaner or
cloth, as this will scratch the classic
stainless steel finish.
U S E & C A R E
G L A S S D O O R C L E A N I N G
The glass door panel of Model UC-24B can be
cleaned using any standard glass cleaner avail-
able on the market today.
I N T E R I O R C L E A N I N G
To clean interior surfaces and removable parts,
wash with a mild solution of soap and luke-
warm water with a little baking soda. Do not
use vinegar. Rinse and dry thoroughly. Avoid
getting water on lights, control panel and LCD
display.
IMPORTANT NOTE: Do not use abrasive
cleaners or cloths on any of the interior or
exterior surfaces, including the glass door
panel.
Before cleaning the unit, shut the electric-
ity off at the control panel.
Do not submerge or pour hot water over
cold glass shelves.