Axent COLIN User Manual page 22

TROUBLESHOOTING
Malfunction
Water temperature unstable
Oscillation function on
nozzle does not work
Dryer does not work
Warm-air from dryer sud-
denly stops
Seat does not warm up
Auto flush does not work
Deodorizer does not work
Deodorizer continues to run
after use
One « beep » per 3 seconds
One « beep » per second
Cause
Seat fails to sense seated
Incoming water pressure
beyond normal range
Attempted to start oscilla-
tion before wash cycle
Seat fails to sense seated
Attempted to dry during
wash cycle
User left seat during dry
cycle
Seat temperature is set low-
est level
Auto flush is off
Sensor in seat is being
tripped
Seat fails to sense seated
Deodorizer will run for 1
minute after use for better
performance
Knob reset error
Temperature control sys-
tem error
Remedy
Ensure proper seating over sensor in seat.
Regulate incoming water pressure.
Restart oscillation during wash cycle.
Ensure proper seating over sensor in seat.
Begin dry cycle after stopping wash cycle.
Ensure proper seating over sensor in seat.
Increase Seat temperature level.
Turn on Auto flush.
Ensure nothing is obstructing the sensor. Flush with remote or manu-
al flush button.
Ensure proper seating over sensor in seat.
This is normal.
Ensure control knob is properly set to STOP.
Disconnect power cord and contact customer service.
Page
8
23
10
8
11
8
14
16
8
8
/
/
/
21