Viessmann CS 900 Assembly Manual page 8

GB
2.3 Installation of conduits
Solder the evaporator to the refrigeration unit at the points
(P and Q) on the refrigeration unit using a suitable copper
pipe with the soldering points on the evaporator.
Test all soldering points for sealing.
The length of the conduit may not exceed 15 m!
Unit
Fluid Conduit (P)
Suction Pipe (Q)
Unit
Fluid Conduit (P)
Suction Pipe (Q)
2.4 Laying electrical cables
The electrical cables should be laid along the pipes.
Insert the electrical plug into the proper socket on the
refrigeration unit template.
Attention!
Do not connect electrical power supply until beginning
of operation - Danger!
General notice (liability): the details of this technical documents serve for description. Consents regarding the availability of certain features or
regarding a certain purpose always require a special written agreement.
Page No. 5237325-06 GB
Pipe diameter in mm
CS 900 CS 1300 CS 2000
6 6 6
10 12 12
FS 900 FS 1400 FS 1800
6 10 10
12 16 16
CS 2800
10
16
FS 2400
10
16
2.3 - 2.4
Right reserved to make technical changes!