Viessmann CS 900 Assembly Manual page 5

2. Installation of a refrigeration unit
in a Viessmann coldroom
2.1 Assembly of the condenser unit
The condenser unit is assembled outside of the coldroom.
The length of the electric cable on the evaporation unit is
15 m, including plug. This is also the maximum distance
between condenser and evaporator.
The minimum distance to the ceiling must be 250 mm to
guarantee proper ventilation
Attention!
This minimum distance must be checked prior to
assembly of the evaporator!
Attention!
The assembly and installation of a split unit must be
done by an approved specialist!
Release the locking screws on the front panel (4).
Remove front panel.
Anchor the evaporation unit on the drill holes provides at
the back of the unit on the wall using the anchoring
material provided.
General notice (liability): the details of this technical documents serve for description. Consents regarding the availability of certain features or
regarding a certain purpose always require a special written agreement.
Page No. 5237323-06 GB
2 - 2.1
GB
Right reserved to make technical changes!