Table of Contents
Advertisement
4. Installation continued
Step 15:
Connect male plug from rangehood to main
power supply. (Refer figure 13)
Step 16:
Connect female plug from rangehood to
male plug of fan. (Refer figure 13)
Step 17:
Installing the flue cover
With both flue pieces connected to each
other (smaller piece to the outside) place on
top of rangehood.
Slide the inner piece up to ceiling height and
screw into the mounting bracket installed in
step 9. (Refer figure 14/15)
With the top half of the flue now secure you
will now need to secure the bottom piece
Screw the bottom piece to the rangehood
and also screw to the top piece for extra
support. (Refer figure 16)
Step 18:
Thank you for purchasing an A Grade
rangehood. Enjoy!
Figure 13
Figure 14
Figure 15
Figure 16
AGF Professional 1200 PAGE 6
Advertisement
Table of Contents
