Felisatti MTF 216/1100T Operating Instructions Manual

Felisatti MTF 216/1100T Operating Instructions Manual

Advertisement

Quick Links

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MTF 216/1100T and is the answer not in the manual?

Questions and answers

Summary of Contents for Felisatti MTF 216/1100T

  • Page 4 TECHNICAL DATA Mitre saw MTF216/1100T MTF250/1500T Absorbed power 1100 1500 No-load speed / min 5000 4300 Cut at 90º/mitre (AxB Fig.4 a) 58x133 70x150 Cut at 45º/mitre (AxB Fig.4 b) 58x90 70x85 Cut at 90º/blade at 45º (AxB Fig.4 c) 35x1330 47x150 Cut on upper bench...
  • Page 5 which is raised by the work when it comes close to the cut. MITRE SAW ADJUSTMENT - SQUARING WARNING – these protectors must not be removed, in order The mitre is delivered by the manufacturer already adjusted and to prevent danger for the operator. squared according to standard pa-rameters.
  • Page 6 - Tighten the lock nut to make sure that the position does not upper plane, proceeding to lock the handles once more. change. 7. USE OF THE STOP GUIDE FOR THE UPPER BENCH (Fig.7) Use as follows: - Insert guide T in the upper bench. OPERATION AND USE - Select the cutting width.
  • Page 7 See general Guarantee conditions printed on an adjoining sheet. DECLARATION OF CONFORMITY We hereby declare, under our own responsibility, that the FELISATTI products described in this manual MTF216/1100T and MTF250/1500T comply with the following standards or standard documents: EN 61029-1, EN 55014 and EN 61300-3 in accordance with EU Directives 73/23/EEC, 89/336/EEC, 98/37/ EEC and 2002/95/EEC.
  • Page 8 Interskol Power Tools S.L. Carretera de Sant Joan de les Abadesses s/n17500 RIPOLL, (Girona), SPAIN Tel +34972700200 Fax +34972700554 e-mail: felisatti@interskol.es...

This manual is also suitable for:

Mtf 250/1500t

Table of Contents

Save PDF